KitchenAid KUDD03STPA Installation Guide - Page 8

3. Adjust leveling legs based on the cabinet opening measurement and the chart below. Option 1: Right-hand side utility route X H 17" (43.2 cm) 17¹⁄₈" (43.5 cm) 17¹⁄₄" (43.8 cm) 17³⁄₈" (44.1 cm) 17¹⁄₂" (44.5 cm) 17⁵⁄₈" (44.8 cm) 17³⁄₄" (45.1 cm) : X : 0 0.3 cm) :¼" (0.6 cm 1 cm) :½" (1.3 cm 1.6 cm 1.9 cm) H 17⁷⁄₈" (45.4 cm) 18" (45.7 cm) 18¹⁄₈" (46 cm) 18¹⁄₄" (46.4 cm) 18³⁄₈" (46.7 cm) 18¹⁄₂" (47 cm) : X 2.2 cm) :1" (2.5 cm) :1¹⁄₈" (2.9 cm) :1¹⁄₄" (3.2 cm) :1³⁄₈" (3.5 cm) :1¹⁄₂" (3.8 cm) 4. Place dishwasher in upright position. Route wire through 1½" (3.81 cm) hole located 8" (20.32 cm) above the floor. After routing the electrical wire through the right-hand hole, attach the wire to back left-hand side of cabinet wall 8" (20.32 cm) above the cabinet floor. Then continue routing the wire along the left-hand side of cabinet opening to the front of the opening. Option 2: Left-hand side utility route Route Electrical Wiring WARNING Electrical Shock Hazard Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher. Failure to do so can result in death or electrical shock. Follow all national and local codes and ordinances for completing electrical supply to cabinet. Route wire through 1½" (3.81 cm) hole located 8" (20.32 cm) above the floor. After routing the electrical wire through the left-hand hole, continue routing the wire along the left-hand side of cabinet floor to the front of the opening. 8