KitchenAid KUDE40FXSS Installation Guide - Page 24
Power supply cord, Plug into, a grounded 3 prong outlet, Reconnect power, Reinstall access panels - 4 parts
UPC - 883049209913
View all KitchenAid KUDE40FXSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Check that grounding clip is attached to the lower panel. Position the lower panel behind the access panel. On some models there is insulation on the access panel which must fall behind the insulation on the lower panel. 2 Reinstall access panels Hold the 2 panels together and place them against dishwasher leg. Using a Phillips or ¹⁄₄" screwdriver, reinstall the screws through the holes in the access panel and the slots in the lower panel. 3 Check lower panel edge WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1 Power supply cord-Plug into a grounded 3 prong outlet Check that the lower edge of the lower panel contacts the floor. Adjust if necessary. 4 Tighten screws Plug into a grounded 3 prong outlet. Check that power supply cord does not touch dishwasher motor or lower part of dishwasher tub. Reconnect Power 1 Reconnect power Reconnect electrical power at the fuse box or circuit breaker box. Tighten access panel screws. 24