KitchenAid KUDE60FXSS Use & Care Guide - Page 11

Canceling A Cycle 1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door. 2. Press CANCEL/DRAIN button once. The Cancel/Drain light will light up. 3. Close the door and the dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the dishwasher drain completely. The Cancel/Drain light turns off after 2 minutes. Changing A Cycle After Dishwasher Is Started 1. You can interrupt a cycle and restart your dishwasher from the beginning using the following procedure. 2. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely. 3. Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser before restarting your new cycle. 4. Press CANCEL/DRAIN twice to reset the control. 5. Select new cycles and options. 6. Press START/RESUME. Adding A Dish After Dishwasher Is Started 1. Check if Add a Dish indicator is lit. (Available on some models. Otherwise, proceed to Step 2). 2. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely. 3. Check whether the detergent dispenser cover is still closed. If it is open, the wash cycle has already started and adding a dish is not recommended. 4. If detergent has not yet been used (detergent dispenser cover is closed), you may add a dish. 5. Press START/RESUME. Dishwasher Features Your KitchenAid dishwasher may have some or all of these features. ProScrub® Option Wash Area The ProScrub® option wash area is located at the back of the lower level rack. NOTE: If your silverware does not fit into the designated slots, flip the covers up and push them down into the basket. Back of dishwasher NOTE: You must select the ProScrub® option to use this feature. Make sure items do not interfere with the water feed tube, spray arms, or ProScrub® spray jets. ■ Keep the last tine row in the back of the lower rack in the 60° angled position when using the ProScrub® option. ■ Load pans, casserole dishes, etc. in the back of the lower dish rack with the soiled surfaces facing the ProScrub® spray jets, and resting on the last row of tines in the angled position. ■ Only one row of items may face the ProScrub® spray jets. Stacking, overlapping or nesting items will keep the ProScrub® spray jets from contacting all of the surfaces. Silverware Basket Use the slots in the covers to keep your silverware separated for optimum wash. There are specially designed slots (small round holes) for chopsticks. Mix silverware types to keep them separated. Load knives down, forks up, and alternate spoons, for best cleaning results. CULINARY CADDY® Utensil Basket Use the utensil basket to hold specialty cooking utensils (serving spoons, spatulas, and similar items), or overflow silverware items. The basket hangs on the bottom rack in the right-hand corner. Load the basket while it is on the bottom rack or remove the basket for loading on a counter or table. NOTE: Spin the spray arms. Be sure items in the basket do not stop the rotation of the spray arms. SURE-HOLD® Cup and Stemware Holder Fold down the extra shelf on the left-hand or right-hand side of the mid level rack to hold additional cups, stemware or long items such as utensils and spatulas. NOTE: Remove the culinary tool basket(s) when washing tall stemware or other tall items in the top rack. 11