KitchenAid KUID508HWH Dimension Guide - Page 3
KUID308H/ KUID508H/ KUIO338H - D 24 x W 17, x H 25, depth without handle, KUID308H/ KUID508H,
View all KitchenAid KUID508HWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
DETAILED PLANNING DIMENSIONS 3 of 3 18" ICE MACHINES KUID308H/ KUID508H/ KUIO338H - D 24" x W 1711⁄16" x H 2555⁄32" (depth without handle) OPENING/CLEARANCE DIMENSIONS A BC DE eF wG H FRONT VIEW Wall I Floor SIDE VIEW J KUID308H/ KUID508H/ MODEL # KUIO338H in cm A* Width (min.) 18 45.7 B* Width of outlet location 6 15.0 C* Outlet location - distance from side 1 2.5 D* Width of water connection location 31⁄2 8.9 E Height (min.) 34 86.4 F Height of outlet location 8 20.3 G Height of water connection location 9 22.9 H Outlet location - distance from bottom 12 30.5 I Depth of cabinet (min.) 24 61.0 J Water line location - distance from side 215/32 6.28 K Power supply - distance from side 323/32 9.45 L Drain hose - distance from side 849/64 22.25 M Power supply - distance from bottom 117/64 3.19 N Drain hose - distance from bottom 241/64 6.79 O Water line location - distance from bottom 119/16 29.38 e Recommended electrical connection location w Recommended water connection location * Install 3/4" (1.9 cm) front hinge-side spacer flush with face of adjacent cabinet and 3/4" (1.9 cm) back hinge-side spacer 6" (15.2 cm) from back wall. M K L BACK VIEW O N ELECTRICAL REQUIREMENTS 115 V, 60 Hz, AC only, 15 or 20 A fused, grounded circuit is required. A dedicated circuit is recommended. Use an outlet that cannot be turned off by a switch. Do not use an extension cord. WATER PRESSURE REQUIREMENTS A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the ice maker. Call a licensed, qualified plumber with any questions about the water pressure. Reverse Osmosis Water Supply IMPORTANT: The use of a reverse osmosis system with this product is not recommended. However if you do use reverse osmosis, follow these instructions. IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the ice machine needs to be between 30 and 120 psi (207 and 827 kPa). If a reverse osmosis water filtration system is connected to the cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All KitchenAid® appliances are appropriately UL, CUL or CSA approved. W11349806A 19-Mar-2019 01:02:51 EDT | RELEASED ®/™ ©2019 KitchenAid. All rights reserved. 03/19 In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")