KitchenAid UXB1200DYS Installation Guide - Page 8
Electrical Connection Inside Range Hood Between In-line, Blower System and Range Hood
View all KitchenAid UXB1200DYS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
WARNING Electrical Shock Hazard Electrically ground blower. Connect ground wire to green and yellow ground wire in terminal box. Failure to do so can result in death or electrical shock. 8. Connect the green (or yellow/green) ground wire to the green/yellow ground wire (H) in the terminal box using UL listed wire connectors. 9. Reinstall the in-line blower terminal box cover and screw. 10. Reinstall the front cover of the in-line blower housing and secure it with 10 mounting screws. Electrical Connection Inside Range Hood Between In-line Blower System and Range Hood 1. With the range hood mounted (see the range hood installation instructions), locate the wiring cable connector inside the range hood. 2. Connect the 6-wire connector assembly supplied with the in-line blower motor system to the mating cable connector from the range hood. 3. Locate the terminal box inside the range hood and install a ¹⁄₂" (1.3 cm) UL listed or CSA approved strain relief (see the range hood installation instructions). 4. Run the wire ends from the 6-wire connector assembly through the ¹⁄₂" (1.3 cm) strain relief, leaving enough wire length to make the wiring connections. Tighten the strain relief screws. 5. Connect the wires from the 6-wire connector assembly to the wires from the wiring conduit inside the range hood terminal box. 6. Connect the same color wires to each other (black to black, white to white, etc.) using UL listed wire connectors. NOTE: Connect the green (or green/yellow) ground wire from the wiring conduit to the green (or bare) ground wire from the home power supply using UL listed wire connectors (see the "Make Electrical Power Supply Connections to Range Hood" section in the range hood installation instructions). B C D E F A G H I A. UL listed or CSA approved ¹⁄₂" wiring conduit B. UL listed wire connectors C. Black wires D. White wires E. Red wires F. Blue wires G. Gray wires H. Green (or green/yellow) wire I. 6-wire connector assembly 7. Connect the home power supply wiring to the range hood following the instructions that are supplied with the range hood. 8. Reinstall the range hood terminal box cover. 9. Reconnect power. 8