KitchenAid UXG7360VDS Use & Care Guide - Page 10
Replacing a Halogen Lamp
UPC - 883049147376
View all KitchenAid UXG7360VDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
To Remove Metal Grease Filters 1. Turn off fan and lights. Check that halogen lamp is cool. Using the filter handles, pull filter towards the front of the grill vent hood. B Step 1 Step 2 C A Step 3 Replacing a Halogen Lamp Turn off the grill vent hood and allow the halogen lamp to cool. Replace using the light bulb removal tool (provided). If new lamps do not operate, make sure the lamps are inserted correctly before calling service. 1. Disconnect power. 2. Using the light bulb removal tool, twist the halogen bulb counterclockwise to remove. 3. Replace with a GU10, 120-volt, 35-watt, halogen lamp. Check that the 2 pins on the light bulb are properly inserted in the lamp holder socket holes. A. Filter handles B. Front edge of filter C. Back edge of filter 2. Pivot the back edge of the filter towards the back of the grill vent hood. 3. Drop the front edge of the filter down and remove. To Replace Metal Grease Filters 1. Insert the back edge filter into the filter opening. 2. Place the front edge up into place in the channel and firmly press forward, depressing the springs while positioning the back edge of the filter into place in the rear channel. METAL GREASE TRAYS Metal grease trays should be cleaned along with the metal grease filters. To Clean: 1. Remove metal grease filters. See "Metal Grease Filters" section. 2. Remove grease trays from the back channel as shown in following illustration. Clean and replace. 4. Using the light bulb removal tool, replace halogen bulb by twisting it clockwise into the socket. 5. Reconnect power. A B A. Grease tray B. Back channel of grill vent hood 10