Kodak 1895754 Extended User Guide - Page 12

Getting started The following types of standard picture frames will not fit on your EASYSHARE Digital Frame. Frames that secure a photo by pressing it between two pieces of glass. A deep frame that's designed to hold 3-dimensional objects instead of photos. Frames with inserts in which the insert holds the standard picture size. Frames with a hinged or otherwise non-removable back. Frames with a curved or uneven mounting surface. Frames with a round, oval, or other non-rectangular mounting area. Frames in which you slide the picture into one end.* Handcrafted frames.* * You may be able to use these frame types. Check for individual frame compatibility. General attachment details 1 If the faceplate that was packaged with your frame is attached, remove it (see page 1). 2 Remove the back, backing material, and the glass from the standard picture frame. Use CAUTION when handling the glass, the edges are sharp. NOTE: You must remove the glass. Store the original faceplate and contents of the standard picture frame in the box that came with your digital frame. Keep for later use. 3 Place the standard picture frame face down on a protected flat surface, and place the digital frame into the picture frame. 4 Attach the frames together according to the following directions. Keep any leftover foam spacers for later use. 5 When attached, make sure the digital frame is secure within the picture frame and can't shift or move around. 7 www.kodak.com/go/support