Kodak 8412447 User Guide - Page 21
Turning the scanner on/finalizing Kodak Driver Software installation, Installing application
UPC - 041771947477
View all Kodak 8412447 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Turning the scanner on/ finalizing Kodak Driver Software installation When the USB and/or SCSI cable and power connections have been made, and the Kodak Software Drivers have been properly installed, the installation will be complete when the PC and the scanner have been powered up in the proper sequence. 1. Turn off the host PC. 2. Use the power switch on the back of the scanner to turn the scanner on (I). When you turn on the scanner, the scanner goes through a series of self-tests, the green LED indicator will flash. When it is finished and ready to scan, the indicator will stop flashing and stay lit. If the scanner does not pass the self-test, refer to Chapter 6, Troubleshooting. 3. Turn on the host PC. The following screens are based on Windows 2000. However, depending on the computer operating system you are using, these screens may be different. Your operating software will now auto detect the scanner. Installing application software 4. To test the scanner, refer to the section entitled "Verifying your scanner installation" in Chapter 3. If the driver installation was unsuccessful, see the section entitled, "Scanner not working" in Chapter 6, Troubleshooting. The Kodak Scan Validation Tool is installed by default when installing the Kodak Driver Software. Refer the section entitled, "Verifying your scanner installation" in Chapter 3 for instructions and use. Other scanning applications are also provided. If you choose to use one of these applications, or another image capture application not provided, see the User Guide's provided with these applications for instructions on how to install and use the software. A-61527 May 2006 17