Kodak CX4310 User Manual - Page 72

Set the Orientation Sensor, Orientation Sensor when

Get Kodak CX4310 - EASYSHARE Digital Camera PDF manuals and user guides
UPC - 000417710448
View all Kodak CX4310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Chapter 9 Camera Problem Cause Solution Camera freezes up Camera detects an error Turn the camera off, then when a card is when the card was back on. Make sure the inserted or inserted or removed. camera is turned off before removed. inserting or removing a card. Picture is too light. The flash is not needed. Change to Auto flash (page 18). The subject was too Move so there is at least 1.6 close when the flash was ft (0.5 m) between the used. camera and the subject. Lighting condition is too Decrease exposure bright. compensation (page 23). Stored pictures are The card was removed Make sure the ready light is damaged. when the ready light was not blinking, then turn off blinking. the camera before removing the card. Pictures remaining Picture does not take up The camera is operating number does not sufficient space to normally. Continue taking decrease after decrease the picture pictures. taking a picture. remaining number. Picture orientation The camera sensed that Set the Orientation Sensor is not accurate. it was rotated or tilted (page 26). Turn off the while the picture was Orientation Sensor when taken. your subject is above or below you (such as in the sky or on the floor). 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
64
Chapter 9
Camera freezes up
when a card is
inserted or
removed.
Camera detects an error
when the card was
inserted or removed.
Turn the camera off, then
back on. Make sure the
camera is turned off before
inserting or removing a
card.
Picture is too light.
The flash is not needed.
Change to Auto flash
(
page 18
).
The subject was too
close when the flash was
used.
Move so there is at least 1.6
ft (0.5 m) between the
camera and the subject.
Lighting condition is too
bright.
Decrease exposure
compensation (
page 23
).
Stored pictures are
damaged.
The card was removed
when the ready light was
blinking.
Make sure the ready light is
not blinking, then turn off
the camera before removing
the card.
Pictures remaining
number does not
decrease after
taking a picture.
Picture does not take up
sufficient space to
decrease the picture
remaining number.
The camera is operating
normally. Continue taking
pictures.
Picture orientation
is not accurate.
The camera sensed that
it was rotated or tilted
while the picture was
taken.
Set the Orientation Sensor
(
page 26
). Turn off the
Orientation Sensor when
your subject is above or
below you (such as in the
sky or on the floor).
Camera
Problem
Cause
Solution