Kodak CX7300 User Manual - Page 37
Problem, Cause, Solution, NTSC or PAL
![]() |
UPC - 041778486689
View all Kodak CX7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Troubleshooting Problem Cause Solution In Review mode, a File format is blue or black screen unrecognized. is displayed instead of a picture. Transfer the picture to the computer (page 27). Shutter button does Camera is not turned on. Turn on the camera (page 4). not work. Camera is processing a Wait until the ready light stops picture; the ready light blinking red before attempting to take (near the viewfinder) is another picture. blinking red. Card or internal memory Transfer pictures to the computer is full. (page 27), delete pictures from the camera (page 17), switch image storage locations (page 12), or insert a card with available memory (page 7). Shutter button was not For best pictures, see page 8. pressed. Slide show does not Video Out setting is run on external incorrect. video device. External device is set incorrectly. Adjust the camera Video Out setting (NTSC or PAL, page 14). See the external device's user's guide. Picture is too light. Subject was too close for Move so there is at least 2.6 ft (0.8 m) flash. between camera and subject. Too much light. Decrease Exposure Compensation (page 11). Picture is not clear. Lens is dirty. Clean the lens (page 39). Subject too close when Move so there is at least 2.6 ft (0.8 m) taking picture. between the camera and the subject. Subject or the camera Place the camera on a flat, steady moved while the picture surface or use a tripod. was taken. 30
![](/manual_guide/products/kodak-cx7300-user-manual-b4b3430/37.png)