Kodak DC215 User Manual - Page 59
Change to Auto
UPC - 041778768976
View all Kodak DC215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Camera Problem Cause Solution Picture is too light. The flash is not needed. Change to Auto flash. See page 13. The subject is too Move so there is at close when the flash least 1.6 ft (0.5 m) was used. between the camera and the subject. The light sensor is covered. Hold the camera so your hands or other objects do not cover the light sensor. The Exposure Decrease the Compensation is set Exposure incorrectly. Compensation. See page 14. Stored pictures are damaged. The camera memory Make sure the card was removed Ready light is not when the Ready blinking before light was blinking. removing the card. Pictures remaining number Image Resolution The camera is does not decrease after and Quality settings operating normally. taking a picture. do not take up Continue taking sufficient space to pictures. decrease the picture remaining number. 7 Picture is not clear. The lens is dirty. Clean the lens. See page 65. Subject too close Stand at least 1.6 ft when taking picture (0.5 m) in wide angle, 3.3 ft (1 m) in telephoto. Subject or the camera moved while the picture was taken. Hold camera steady until the picture is taken. The subject is too far Move so the subject away for the flash to is less than 10 ft be effective. (3.0 m) away. 53