Kodak G610 User Manual - Page 38
or inside the printer dock - color cartridge and paper kit
UPC - 041778811504
View all Kodak G610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Troubleshooting If... Try the following Printing stops IMPORTANT: Use only Kodak color cartridge & paper kits (with during mid-print symbol) for your printer dock. Do not use inkjet paper. (paper stops feeding) I Check the power connection. I Check the paper: 1 Remove the paper tray (page 6). 2 Check the paper slot on the back of the printer dock. 3 Remove loose paper from the printer dock. If paper is jammed, see page 31. 4 Carefully "fan" the paper to keep the sheets from sticking together (see page 29). 5 Reload the tray. Do not load more than 30 sheets of paper (see upper limit line, , inside tray). 6 Re-install the tray, then press to resume printing. I Clean the paper-feed rollers (page 26). Print is smudged I Fingerprints may be on glossy side of paper. Handle paper by the edges (page 2). Print is spotted I Check for dirty paper; wipe paper gently with a dry, lint-free cloth to remove dirt. For excessive dirt or debris, thoroughly clean the paper tray, and load new paper (page 4). Check and clean the paper-feed rollers (page 26). NOTE: Keep paper in the original protective wrap, and remove and close the paper tray and paper tray door to keep dust and debris from collecting on the paper or inside the printer dock (page 6). 32 www.kodak.com/go/support