Kodak I810 User Guide - Page 63
Cleaning the feed module tires and separation roller tires, Replacing lamps
UPC - 041771070519
View all Kodak I810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Cleaning the feed module tires and separation roller tires The cleaning procedures below should be performed daily. More frequent cleaning may be necessary depending on throughput and document type. Daily cleaning of the feed module tires and separation roller tires prevent ink, toner, dust and paper contaminates from collecting on the rollers, which help documents to separate properly when feeding. 1. Open the swing out door. 2. Remove the feed module. 3. Lift the roller cover. 4. Remove the feed module and separation roller. 5. Rotate the feed module tires and separation roller tires and scrub with an Emulsiclean wipe. Continue cleaning until all residue is removed from the tires. 6. Dry the tires with a dry, lint-free cloth. 7. Reinstall the separation roller. 8. Lower the roller cover. 9. Reinstall the feed module. 10. Close the swing out door. Replacing lamps There are four identical lamps in the scanner. Replace all lamps using the same procedure. CAUTION: Lamps that have been operating are HOT. Before attempting to replace the lamps, make sure the scanner is turned off and you have allowed the lamps to cool for at least 10 minutes. 1. Open the bi-fold door. A-61169 January 2005 5-17