Kodak One / 4MP User Guide - Page 51
Connecting to a Wi-Fi wireless network
UPC - 041778009772
View all Kodak One / 4MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Using your camera with a Wi-Fi wireless network Connecting to a Wi-Fi wireless network Once connected to a Wi-Fi wireless network, you can use the wireless capabilities of your camera. NOTE: The range of a typical Wi-Fi wireless network can vary between 100 to 300 ft (30 to 90 m), depending on signal obstructions or other interference. Make sure you are in the vicinity of the Wi-Fi wireless network you want to connect to. 1 Slide the Capture/View switch to View . 2 Insert a Kodak Wi-Fi® card (may be sold separately) into the camera (see page 43). 3 Deploy the Wi-Fi card (see page 43). If the card is already in the deployed position, you can re-scan for available networks by: - Touching the Wireless icon, , located on the bottom toolbar. - Pressing the Menu button, selecting Setup, then selecting Available Networks under the Wireless menu. - Redeploying the Wi-Fi card by retracting, then deploying the card (see page 43). The wireless network status light (next to the Wi-Fi card slot) blinks amber as the camera scans for available networks. www.kodak.com/go/support 44