Kodak V603 User Manual - Page 56
Direct printing PictBridge enabled printer problems, In Auto and SCN-Custom modes
UPC - 041771881511
View all Kodak V603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Troubleshooting Status Solution Picture is too dark ■ Reposition the camera for more available light. ■ Use Fill flash (page 9) or change your position so light is not behind the subject. ■ Move so that the distance between you and the subject is within the effective flash range (page 54). ■ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. Picture is too light ■ Reposition the camera to reduce the amount of available light. ■ Turn the flash off (page 9). ■ Move so that the distance between you and the subject is within the effective flash range (page 54). ■ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. ■ In Auto and SCN-Custom modes, adjust the Exposure Compensation (page 34). Direct printing (PictBridge enabled printer) problems Status Solution Cannot find the desired picture. ■ Turn on the camera. Make sure the camera is not in Favorites mode. ■ Use the Direct print menu to change the image storage location. The Direct print menu interface turns off. ■ Press any camera button to redisplay the menu. Cannot print pictures. ■ Make sure there is a connection between the camera and the printer (page 44). ■ Make sure the printer and the camera have power. Camera or printer display an error ■ Follow the prompts to resolve the issue. message. 50 www.kodak.com/go/support