Kodak V610 User Manual - Page 63
Computer/connectivity problems, Bluetooth problems, Status, Possible Solutions, Light status, Cause - troubleshooting
UPC - 041778636763
View all Kodak V610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Troubleshooting Computer/connectivity problems Status Possible Solutions Computer does not communicate with the camera ■ Insert a charged battery (page 1). ■ Turn on the camera. ■ Make sure the USB cable model U-8 is connected to the camera and the computer (page 44). (If using an EasyShare dock, check all cable connections. Make sure the camera is seated on the dock.) ■ Make sure EasyShare software is installed (page 43). Pictures do not ■ See Help in EasyShare software. transfer to computer Slide Show does not ■ Adjust the camera Video Out setting (NTSC or PAL, page 33). run on an external ■ Make sure the external device settings are correct. (See the video device device's user's guide). Bluetooth problems Light status Cause Camera cannot communicate with another device. ■ Make sure the antenna is not obscured, and the camera is properly set up. (See Using Bluetooth wireless technology features, page 48.) ■ Make sure the external device settings are correct. (See the device's user's guide). Bluetooth status lights The camera's Bluetooth radio is on; the camera is connecting to flash in succession another device. Bluetooth status lights The camera's Bluetooth radio is on; the camera is sending/receiving. flash in unison Lights are off The camera's Bluetooth radio is off; the camera is unable to send/receive Bluetooth signals. www.kodak.com/go/support 57