Kodak Z7590 User Manual - Page 82
Power-ring-light status - firmware update
UPC - 041778852934
View all Kodak Z7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Troubleshooting Power-ring-light status Status Power ring does not turn on and the camera does not work. Power ring glows steady green. Power ring glows steady amber. Power ring blinks green. Power ring blinks amber. Cause ■ Turn on the camera. ■ Recharge the battery or install a new one (page 2). ■ Turn Mode dial off, then back on. ■ Camera is on and ready to take a picture or video. ■ Camera is in Favorite mode. ■ Camera firmware update is in process. ■ Camera is connected to computer, USB connection is active. ■ Date and time set with lens retracted. ■ Camera turned off while picture is being processed and saved. Camera operating normally. Processing is completed before power off. ■ Do not remove the card while the light is blinking. ■ Camera operating normally at power up. Take pictures when the blinking stops. ■ Camera operating normally during connect mode to computer. ■ Battery is low or exhausted. Recharge the battery (page 1). ■ Internal camera temperature is too high. Turn the camera off for several minutes; then turn it back on. If the condition continues, get help (page 75). 72 www.kodak.com/go/support