Konica Minolta AccurioPress 6136 IQ-501 Quick Guide - Page 23

Lower the bottom plate of the tray., Load remained paper with the print side, Push in the tray until

Get Konica Minolta AccurioPress 6136 PDF manuals and user guides View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

2/27/2020 5:45 PM／D11 17 Lower the bottom plate of the tray. Turn the bottom plate fixing knob counterclockwise to release the lock. The tray bottom plate automatically goes down. 18 Load remained paper with the print side up. Align the stack of paper to the left side of the tray. Pushing the lock release lever of the rear guide plate, align it to the edge of the paper. NOTICE ■Do not load above the limit level indicated on the side guide plate of the tray. Also, carefully load paper not to block the air nozzle. ■Be sure that the rear guide plate is securely aligned to the paper. If any gap is left between the rear guide plate and paper, the machine cannot detect the correct paper size, and paper jams or machine trouble may be caused. 19 Push in the tray until it locks into place. The paper level indicator of the tray changes from " " to " " on the [MACHINE] screen and [COPY] screen. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
2/27/2020 5:45 PM
／
D11
22
17
Lower the bottom plate of the tray.
Turn the
bottom plate fixing knob
counterclockwise
to release the lock.
The tray bottom plate automatically goes down.
18
Load remained paper with the print side
up.
Align the stack of paper to the left side of the tray.
Pushing the
lock release lever
of the
rear guide
plate
, align it to the edge of
the paper.
NOTICE
■
Do not load above the limit level indicated on
the side guide plate of the tray. Also, carefully
load paper not to block the air nozzle.
■
Be sure that the rear guide plate is securely
aligned to the paper. If any gap is left
between the rear guide plate and paper, the
machine cannot detect the correct paper size,
and paper jams or machine trouble may be
caused.
19
Push in the tray until it locks into place.
The paper level indicator of the tray changes from
"
" to "
" on the [MACHINE] screen and [COPY]
screen.