Konica Minolta AccurioPress C2070 Plockmatic SD-350/SD-500 System Operator Man - Page 69
BookFold module, Clearing misfeed(s), Inside the BookFold module
![]() |
View all Konica Minolta AccurioPress C2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
BookFold module Clearing misfeed(s) Inside the BookFold module 1 Open the top cover. 2 Lift up upper feed belts (A) to access jammed/misfed booklets. NOTE: Press the green dots (B) (only one visible in picture) on the latches to release. 3 Remove the jammed/misfed booklets. 4 Place the upper feed belts in normal position. 5 Close the top cover. 5 B A B NOTE: The upper feed belt on the operator side cannot be lifted fully. 69
![](/manual_guide/products/konica-minolta-accuriopress-6120-plockmatic-sd350sd500-operator-manual-c4b68e5/69.png)
69
5
A
B
B
1
Open the top cover.
2
Lift up upper feed belts (A) to access jammed/misfed booklets.
NOTE:
Press the green dots (B) (only one visible in picture) on the latches to release.
3
Remove the jammed/misfed booklets.
4
Place the upper feed belts in normal position.
5
Close the top cover.
Inside the BookFold module
Clearing misfeed(s)
BookFold module
NOTE:
The upper feed belt on the
operator side cannot be lifted fully.