Konica Minolta AccurioPress C3080 Plockmatic SD-350/SD-500 USB to RS-232 Adapt - Page 22

Windows CE Installation Guide

Get Konica Minolta AccurioPress C3080 PDF manuals and user guides View all Konica Minolta AccurioPress C3080 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Windows CE Installation Guide Download the latest available drivers for the required processor model from the FTDI website and unzip them, the critical files in the driver package are: ftdi_ser.dll - the VCP driver file FTDIPORT.inf - user changeable file to allow devices with custom VID and PID combinations to be installed Copy all of the unzipped files to the \\Windows directory on the PDA. If the PDA requires a host adaptor (e.g. USB host cable, presentation pack or Compact Flash host card), make sure that it is connected and installed before proceeding. Connect the FTDI device to a host USB port on the PDA. This will provide a dialog box to direct Windows CE to the driver files. Type the full name of the VCP driver file into the dialog box as shown below. If the file name is incorrect, the driver will not be found and the device will not function. The device installation is now complete. The installation may be verified using the test program available form the Utilities page of the FTDI website. Please note: 1. For multiple-port converter, each port has to be installed with the driver individually, i.e. you have to repeat this installation procedure 2 times (2-port converter) or 4 times (for 4-port converter). 2. If you have any difficulties with the drivers we provided in this CD, you may download the updated or appropriate versions from FTDI Web site www.ftdichip.com/Drivers/VCP.htm, supported device "FT232BL(M)". 22-51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Windows CE Installation Guide
Download the latest available drivers for the required processor model from the FTDI website and unzip them, the
critical files in the driver package are:
ftdi_ser.dll - the VCP driver file
FTDIPORT.inf - user changeable file to allow devices with custom VID and PID combinations to be installed
Copy all of the unzipped files to the \\Windows directory on the PDA.
If the PDA requires a host adaptor (e.g. USB host cable, presentation pack or Compact Flash host card), make
sure that it is connected and installed before proceeding.
Connect the FTDI device to a host USB port on the PDA. This will provide a dialog box to direct Windows CE to the
driver files.
Type the full name of the VCP driver file into the dialog box as shown below. If the file name is incorrect, the driver
will not be found and the device will not function.
The device installation is now complete. The installation may be verified using the test program available form the
Utilities page of the FTDI website.
Please note:
1. For multiple-port converter, each port has to be installed with the driver individually, i.e. you have to repeat this
installation procedure 2 times (2-port converter) or 4 times (for 4-port converter).
2. If you have any
difficulties with the drivers we provided in this CD, you may download the updated or appropriate
versions from FTDI Web site
www.ftdichip.com/Drivers/VCP.htm
, supported device “FT232BL(M)”.
22-51