Konica Minolta AccurioPress C4080 Watkiss PowerSquare 2-Knife Trimmer User Man - Page 13
The Basic Window, Basic, Button, Side Trim, Size, Trim Size, Trim Offset
![]() |
View all Konica Minolta AccurioPress C4080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3 - The User Interface - The BASIC Window The BASIC Window The BASIC tings. window gives you access to frequently-changed machine set- Button Information SIDE TRIM The side-trim dimension is calculated automatically according to the PAGE SIZE. If needed, the side-trim dimension can be changed. Touch SIDE TRIM to adjust the size of the finished book. The default setting is 2.5mm from each side. The maximum side-trim is 40mm from each side. The minimum side-trim is 1mm from each side. The machine will not permit a setting that conflicts with the stitch position. Change the stitch pitch if necessary. The side-trim function can be turned off. - AUTO Touch AUTO to select the default side-trim position. - TRIM SIZE Touch '+' or '-' to adjust the side-trim dimension. - TRIM OFFSET By default, the book is trimmed equally on both sides. Touch '+' or '-' to move the trim position away from the centre line. The range is -40mm to +40mm, dependent on how much is to be trimmed. The default setting is 0mm. Watkiss P2T 2-Knife Trimmer User Manual 9
![](/manual_guide/products/konica-minolta-accuriopress-6272p-watkiss-powersquare-2knife-trimmer-user-manual-66af43b/13.png)