Konica Minolta AccurioPress C6100 SD-513 User Manual - Page 179
Saddle Stitcher Adjustment] - [Staple Offset Adjustment]
View all Konica Minolta AccurioPress C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
5 5.15 [Saddle Stitcher Adjustment] - [Staple Offset Adjustment] 5.15 [Saddle Stitcher Adjustment] - [Staple Offset Adjustment] Adjust staple position in Saddle Stitcher SD-513. The misalignment between the staples and the fold can be reduced. 1 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen. 2 Display the Staple Offset Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [02 Finisher Adjustment], [08 Saddle Stitcher Adjustment], and [14 Staple Offset Adjustment] in sequence. % In bizhub PRESS C1070/C1070P/C1060/C71hc, press [04 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [14 Staple Offset Adjustment] in sequence. % In bizhub PRESS C1100/C1085, press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [14 Staple Offset Adjustment] in sequence. 3 Press [Print Mode]. 4 Load 11 e 17 (A3) w paper into a tray, then select that tray key. 5 Press Start on the control panel. A sample pattern will be output. 6 Measure the difference (a) between the fold position and staples. Allowance: a = ^ 1 mm 5-50 7 Exit the print mode to return to the Staple Offset Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 8 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range:-10 (To move leftward) to +10 (To move rightward) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. 9 Press [Set] to change the current data. 10 Repeat the steps from 3 to 9 until the desired result is obtained. 11 Press [Return] to restore the Saddle Stitcher Adjustment Menu Screen. Saddle Stitcher SD-513