Konica Minolta C3300i bizhub C4000i/C3300i Quick Guide - Page 22
How to load paper, Loading envelopes, For Tray 1
![]() |
View all Konica Minolta C3300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
How to load paper 1 Open the Bypass Tray. 6 6.1.3 Loading envelopes Precautions when using envelopes - Remove air from the envelope(s), and securely press along the flap fold line. - Do not use envelopes that have glue or release pa- per on the flap or the part covered by the flap on the body. - The flap side of envelopes cannot be printed on. - When loading envelopes with flaps opened, also select the standard size that matches them. You do not have to measure the size of the envelope with the flap opened to set the size as a custom-sized envelope. NOTICE Be careful not to touch the surface of the Paper Feed Rollers with your hand. 2 Load paper into the tray with the print side facing down. % Insert paper into the tray until their edges are pressed against the back. For Tray 1 Up to 30 envelopes can be loaded into the tray. - Load envelopes with the flap part facing down. - Align the Lateral Guide with the envelope size. - Select the desired envelope size from [Envelop/4 e 6] ([Envelop/A6 Card]) of [Paper Size]. NOTICE Do not load an excessive number of sheets such that the top of the stack is higher than the , mark. If paper is curled, flatten it before loading it. 3 Slide the Lateral Guide to fit the size of the loaded paper. 4 Specify the paper type and paper size. % For details on how to specify the paper type and paper size, refer to the HTML User's Guide. bizhub C4000i/C3300i 21
![](/manual_guide/products/konica-minolta-bizhub-c4000i-bizhub-c4000ic3300i-quick-guide-b69924a/22.png)