Konica Minolta Fujitsu fi-4860C2 Operating Guide - Page 290

9.1 Basic Product Specifications 1 Scanner Type ADF(Automatic Document Feeder) and Manual feed 2 Image sensor Color CCD x 2 Front/Back 3 Light source White fluorescent lamp x 2 Front/Back 4 Scanning area Minimum 74 mm x 74 mm, 2.9 in. x 2.9 in. - Maximum A3 or 11x17 in. - 5 Document thickness 52 g/m2 to 127 g/m2 or 14 lb to 34 lb (* 1) 6 Scanning speed Binary (Black and Simplex 60 ppm (A4 Portrait/Letter White) Duplex 120 ipm Portrait) (* 2) Grayscale Simplex 60 ppm Duplex 120 ipm 200dpi 200dpi Color Simplex 60 ppm Duplex 120 ipm 150 dpi (* 3) 200 dpi (* 3) 7 ADF capacity (* 4) 500 sheets A4 80 g/m2, or Letter 20 lb 8 Optical resolution 400 dpi - 9 Output resolution Binary (Black and 100, 150, 200, 240, 300, 400 dpi - White) Grayscale 100, 150, 200, 240, 300, 400 dpi - Color 100, 150, 200, 300, 400 dpi (* 5)- 10 Grayscale level 8 bits 10 bits internal 11 Output mode of halftone patterns Dither/Error diffusion - 12 Interface (* 6) Ultra Wide SCSI Shielded, 68 pin half density (High Density DB68) 13 Other functions JPEG compression - (* 1) For details, refer to "Chapter 6 ADF DOCUMENT SPECIFICATIONS" on page 6-1. (* 2) The scanning speed is the maximum speed of the scanner hardware. The actual speed may be slower due to the system overhead such as data transfer time. (* 3 )With JPEG enabled (* 4) The maximum capacity varies depending on the document thickness. Refer to "Chapter 6 ADF DOCUMENT SPECIFICATIONS" on page 6-1. (* 5) A3 and 11 x17in document sizes are not supported at color 400dpi. (* 6) Avoid connecting other SCSI devices to the same bus. It can reduces the scaner throughput. 9-2 9.1 Basic Product Specifications