Konica Minolta Fujitsu fi-6670/fi-6770 Getting Started - Page 2

Introduction Thank you for purchasing our fi-6670(A)/fi-6770(A)/fi-6750S series Color Image Scanner. Scanner Models This manual covers the following five scanner models, each featuring as: Model fi-6670 fi-6670A fi-6770 fi-6770A fi-6750S Description Equipped with an automatic document feeder (ADF) for automatic document feeding and duplex scanning. The fi-6670A comes with a color graphics adapter (CGA) board as a standard feature. It enables advanced image processing at a high speed when used with Kofax VRS. Equipped with an automatic document feeder (ADF) for automatic document feeding and duplex scanning, and a flatbed for scanning documents such as thin paper or thick books. The fi-6770A comes with a color graphics adapter (CGA) board as a standard feature. It enables advanced image processing at a high speed when used with Kofax VRS. Equipped with an automatic document feeder (ADF) for automatic document feeding and simplex scanning, and a flatbed for scanning documents such as thin paper or thick books. The ADF features simplex scanning only. Manuals The following manuals are prepared for the scanner. Read them as needed. Manual Package Contents List (paper) Getting Started (This Manual) (paper, PDF) Operator's Guide (PDF) FUJITSU TWAIN 32 User's Guide (PDF) Image Processing Software Option User's Guide (PDF) VRS Note (PDF) Description Lists all the items contained in the scanner package. Make sure all are included in the package. Outlines the procedures from installing up to starting the operation of the scanner. Read this manual first. The PDF data is included in the SETUP DVD-ROM. Provides detailed information on how to operate, and maintain the scanner daily, how to replace the consumables, and how to troubleshoot problems. Included in the SETUP DVD-ROM. Explains how to install and operate the FUJITSU TWAIN 32 scanner driver. Included in the SETUP DVD-ROM. Explains how to install and operate the Image Processing Software Option. Included in the SETUP DVD-ROM. Explains how to connect and install Kofax VRS. Included in the SETUP DVD-ROM. Error Recovery Guide (HTML help) Help - Embedded in scanner drivers Help - Embedded in related applications Details the status of the scanner and explains how to resolve problems encountered. Contains movies that explain how to replace the consumables. Included in the SETUP DVD-ROM. Explains how to use the scanner drivers, and how to configure the settings for them. Explains how to use and configure the settings for the application software. Use help files as necessary. Can be referenced from the applications. Trademarks Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. ISIS and QuickScan are trademarks or registered trademarks of EMC Corporation in the United States. Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems Incorporated in the United States and/or other countries. Kofax and VRS are trademarks or registered trademarks of Kofax Image Products, Inc. Other product names are the trademarks or registered trademarks of the respective companies. Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Phone: (81-44) 540-4538 All Rights Reserved, Copyright © PFU LIMITED 2008 Regulatory Information FCC Declaration This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is located. • Consult your dealer or an experienced radio/TV technician. FCC warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2