Konica Minolta KIP 7700 KIP 7700 User Guide

Konica Minolta KIP 7700 Manual

Get Konica Minolta KIP 7700 PDF manuals and user guides View all Konica Minolta KIP 7700 manuals
Add to My Manuals
Save this manual to your list of manuals

Konica Minolta KIP 7700 manual content summary:

  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 1
    KIP 7700 User Manual Version A1
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 2
    operational explanations for the KIP 7700. Please read this USER'S MANUAL carefully before using the Printer. Please keep this USER'S MANUAL for future reference. 1. When this machine is installed in North America. FCC ID: VP8-K120 This equipment satisfies the requirements in Part 15 of FCC Rules
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 3
    shown indicates that this product conforms to Directive 2002/96/EC of the European Parliament and the council of 27 January 2003 on waste electrical and electronic equipment (WEEE) and does not apply to countries outside of EU. The symbol shown indicates that this product conforms to SJ/T11364
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 4
    the operator or operation of the printer. The following symbols are found throughout the USER'S Manual and have the following meaning: WARNING This WARNING mark means that there is a possibility of death or serious injury if you ignore or do not follow the said instruction. CAUTION This CAUTION mark
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 5
    to move the printer, please contact your service personnel. 1. Do not remove the screw and do not open the cover if not instructed to do so in this User's Manual. If you ignore this warning, you may be burnt or receive an electric shock due to a hot item or electrically charged part inside of the
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 6
    or a dusty room. Also, do not install the printer on an unstable floor as injuries may occur. 1. Unplug the printer before you move it. The power cord may be damaged and it may result in a fire or electric shock. 2. If you do not use the printer for a long duration (holidays, company shutdown) turn
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 7
    POWER CORD INSTRUCTION The installation of (or exchange to) a power plug which fits in the wall outlet of the installation location shall be conducted in accordance with the following: WARNING Select a power plug which meets the following criteria; - The plug has a voltage and current rating
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 8
    7 Specifications for Printing Media 1. 7. 1 Available Print Size 1. 7. 2 Media not to be used 1. 7. 3 Maintaining Media 1. 7. 4 Environmental Condition - Correction Chapter 2 Basic Operations 2. 1 Turning on KIP 7700 2. 2 Turning off KIP 7700 2. 3 Replacing Roll Media 2. 4 Replacing Toner Cartridge
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 9
    3. 2. 2 Upper Frame Unit / Top Cover Open 3. 2. 3 Exit Cover Open 3. 3 Other Errors 3. 3. 1 Roll Replacement 3. 3. 2 Toner Empty 3. 4 Call Service Errors 3-18 3-19 3-20 3-20 3-20 3-21 (8)
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 10
    Chapter 1 Before Use 1. 1 Installation Requirements 1. 2 Originals Prohibited from Duplication 1. 3 Features 1. 4 Specifications 1. 5 Appearance 1. 5. 1 Front 1. 5. 2 Rear 1. 6 Optional Configurations 1. 7 Specifications for Printing Media 1. 7. 1 Available Print Size 1. 7. 2 Media not to be used
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 11
    . Please draw curtains to block any sunlight. When you open the Movable Unit, do not expose the Photoconductive Drum to strong (intense) light as this will damage the Drum. Ozone will be generated while this equipment is use, although the quantity generated is within safe levels. (see certifications
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 12
    ticket or book of tickets, excluding that some specific company copies such originals as many as it requires for its own business. 2. We recommend you is prohibited to copy such originals as book, music, paintings, printed copy, maps, drawings, movie and pictures which are protected by the copyright,
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 13
    print size is 36 inches (914mm) wide, and the minimum one is 8.5 inches (210mm) for cut sheet media, and 11 inches (294mm) for roll media. • The print image is more stabilized than before since we adopt a minute toner for monocomponent development. • The combination of KIP Contact Development System
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 14
    time First print time Fusing method Development method Exposure method Charging method Transfer method Separation method Input power Power consumption Acoustic noise Ozone Dimensions Weight Media Specification KIP 7700 Console Electro photography Organic Photoconductive Drum 120mm per second
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 15
    to shut out the humidity. (Toner cartridge) Keep the toner cartridge away from the direct sunlight, and store it in the condition of 0 to 35 Centigrade (32 - 95 F ) and 10 to 85% RH. NOTE The above specifications are subject to change without notice. NOTE for Tracing Paper / Vellum Due to the
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 16
    here to clear the mis-fed paper. Open here to insert a cut sheet or to pull the Upper Frame Unit. Each Roll Deck drawer holds 2 rolls of print media. You can turn on/off the KIP 7700. This pen is used to operate the User Interface (UI). PLEASE DO NOT use any other pointed object to tap on
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 17
    Connect the cable to this terminal for a KIP Scanner (option). (max.5Vdc) Connect the cable from a finishing device (option). (D-Sub Connector 9 pins: max.12Vdc (Small)) Connect the LAN Cable to connect the KIP 7700 to the network. (Do not connect a telephone line.) 1-8 Chapter 1 Before Use
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 18
    outer devices. KIP 7700 + KIP Scanner KIP Scanner KIP 7700 KIP 7700 KIP 7700 on network Scanner Controller USB2.0 KIP Scanner Other printers Workstation WEB Please contact your dealer for further information of integrating KIP 7700 to your network and other devices. 1-9 Chapter 1 Before Use
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 19
    as an option. You can choose either "24m" or "unlimited" as a maximum print length. Call your service personnel if you would like to print over 6 meters as the user can not change this setting in the printer. If you print longer than 6 meters, the image quality or the reliability of media feeding is
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 20
    1. 7. 2 Media not to be used Do not use the following kinds of printing paper. Doing so may damage the printer. Excessively curled Folded Creased Torn Punched 1-11 Chapter 1 Before Use
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 21
    on a rough surface of the paper. (2) Print image may become defective if the print paper has an excess curl. (3) It will cause paper mis-fed, poor print image or creasing if you use a paper that does not satisfy the specifications. (4) Do not use a paper of which surface is very special, such
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 22
    after the completion of print, and keep it in a plastic bag. NOTE (1) KIP 7700 is equipped with the Dehumidify Heater. Using it in high humidity environment (65% or higher) is recommended. Refer to [2.7 Dehumidifying Roll Media] on page 2-19. (2) "Void of image" and "crease of paper" will occur in
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 23
    (3) Re-appearance of image (solid black image especially) may occur if you print with a humidified film. When film is installed under the high humidity environment (higher than 60%RH), we also recommend that you turn on the Dehumidify Heater. Normal print Re-appeared image 1-14 Chapter 1 Before
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 24
    2 Basic Operations 2. 1 Turning on KIP 7700 2. 2 Turning off KIP 7700 2. 3 Replacing Roll Media 2. 4 Replacing Toner Cartridge 2. 5 Placing Cut Sheet Media 2. 6 Canceling Sleep Mode 2. 7 Dehumidifying Roll Media 2. 8 Stacking Prints on High Capacity Print Tray (option) 2-1 page 2- 2 2- 4 2- 5 2-13
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 25
    2. 1 Turning on KIP 7700 1. Plug the printer into an exclusive wall outlet. WARNING (1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock. (2) Ground the printer for safety. (3) Do not plug the printer into a multi-wiring connector in which other devices are plugged
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 26
    up. Ready Indicator The UI screen may vary depending on your system configuration. (Shown with available options) 4. When Ready Indicator stops flashing, the KIP 7700 is ready for operation. NOTE It is impossible to make any prints while Ready Indicator is flashing in orange. Please wait until it
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 27
    approximately 2 minutes after Power Switch operation for the controller's shutdown. Do not unplug the KIP 7700 before the controller's shutdown. Doing so may damage data or the device. (2) If you use Dehumidify Heater for Roll Decks, the printer should be plugged while the printer is OFF. Refer to
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 28
    Roll Replacement" sign. Follow the later procedure (or as noted in the UI's User Guide) to load a new roll media. Please refer to your KIP IPS Touch Screen Operator's Guide for the UI screen. (2) It is recommended that a tracing paper / vellum roll is loaded to Roll Deck 3 or 4 for 4 Roll type, Roll
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 29
    lever (4) on Flange (2). Remove both Flanges (4) from the roll core (3). 3 4 2 2 2 3. Hold the shown part of the right Slide Guide (5). Move it to match your roll media's width. The right and left Side Guides will automatically move together. 5 Hold here to slide 2-6 Chapter 2 Basic Operations
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 30
    4. Insert each Flange (2) into both ends of the roll media core to be installed. 2 NOTE (1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches the side face of the roll media. Inside Rim OK Inside Rim NG Gap Correct: Fully inserted Wrong: not
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 31
    5. Push both the levers (4) down in either way. Position them flat against Flange to secure the roll media. 4 4 6. Lift the roll media by holding both Flanges. Lower Flanges onto Slide Guides (5). 5 (Continued on the next page) 2-8 Chapter 2 Basic Operations
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 32
    Correct: Edge comes from bottom Wrong: Edge comes from top (2) The outside rim (7) of Flange should meet the black triangle (8) marked on Slide Guide. Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding. OK 8 NG 8 7 7 Correct Wrong 2-9 Chapter 2 Basic
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 33
    7. Insert the leading edge under Guide Plate (9) until it touches the feeding roller (10). Front Deck (Roll 1 / 3) Rear Deck (Roll 2 / 4) 9 9 10 10 9 9 10 10 Roll 1 10 Roll 3 10 2-10 Roll 2 Roll 4 Chapter 2 Basic Operations
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 34
    3 9. Push Roll Deck (1) to firmly close it. Roll 2 Roll 4 1 1 NOTE (1) Be sure to close Roll Deck fully until it locks at the correct position. A paper jam may occur if it is not locked firmly. (2) Be sure not to catch your finger in between Roll Deck drawers. 2-11 Chapter 2 Basic Operations
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 35
    10. When you close Roll Deck, "Define Roll" screen will appear on the UI screen. Choose the correct width and type, and press "Initial Cut" button (with scissors icon) for the corresponding Roll Deck. 2-12 Chapter 2 Basic Operations
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 36
    (or as noted in the UI's User Guide) to replace the Toner Cartridge with a new one (genuine). NOTE (1) The KIP 7700 Toner Cartridge is embedded with the IC Tag for an exclusive use on KIP 7700. Even if a Toner Cartridge for other models is installed, the KIP 7700 does not operate with indicating
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 37
    joint will be latched on the right.) Joint NOTE Slide the Joint until it clicks to unlock the toner cartridge. Not doing so may damage the toner supply system. 4. Press and hold the green lever. Rotate Toner Cartridge body (not the Cap of Cartridge) to the arrow direction in order to close the
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 38
    lever down until it clicks. Insert the far left pin on Toner Cartridge into the slot firmly. (Please direct the opening on Toner Cartridge downward at this time.) 2 1 NOTE Please confirm that the green lever firmly locks the Toner Cartridge at the correct position. (It must be at a level position
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 39
    Toner Cartridge is closed firmly so as not to lose the toner during the transportation) NOTE Even if the Joint is not fit to the Toner Cartridge, when you turn on the printer, it is automatically fit properly. 10. Push in Upper Frame Unit firmly. Close the Manual Table. Upper Frame Unit Manual
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 40
    up" sheets tend to result in a mis-feed. OK NG Correct (curl down) Wrong (curl up) (2) Setting a cut sheet to the bypass feeder while printing may cause a paper jam. Be sure to check the printer is idle (not processing a print job) before setting a cut sheet. 2-17 Chapter 2 Basic Operations
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 41
    has two Sleep Modes to reduce the power consumption. The KIP 7700 will enter Sleep Mode after a certain period of inactivity. In the default setting; • Warm Sleep Mode will start after a 15 minute of inactivity in order to reduce the power supply for Fuser Unit. • Cold Sleep Mode will start after
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 42
    paper is extremely humid, it may cause poor prints. You will experience most likely "creasing" and "voids". Normal Print Creasing If the media is humidified; Normal Print also recommend that you turn on the Dehumidify Heater. Normal print Re-appeared image Turn on the Dehumidify Heater if the
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 43
    position. Call your service personnel if you would like to change the switch setting. Note that the user can not change the setting. (2) To achieve the best image quality, we recommend that you use media that is unpacked from the manufacture right before installing it into the printer. If media is
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 44
    Tray (option) "High Capacity Print Tray" (option) has the ability to support up to 100 sheets of prints behind the printer. "High Capacity Print Tray" Stack Capacity: Plain Paper Tracing Paper Vellum Film 100 sheets 10 sheets 1 sheets standard size only, a single print set in the same size High
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 45
    a paper jam. OK: all prints stacked as ejected NG: all stacked prints displaced NG: part of stacked prints displaced (2) Do not place any object except for the ejected prints from the printer on the tray. Please contact your local dealer for other outer devices (Scanner, Auto Stacker, Folder
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 46
    J-14) 3. 1. 5 Outer Device (J-21, J-22) 3. 2 Open Cover Errors 3. 2. 1 Roll Deck Open 3. 2. 2 Upper Frame Unit / Top Cover Open 3. 2. 3 Exit Cover Open 3. 3 Other Errors 3. 3. 1 Roll Replacement 3. 3. 2 Toner Empty 3. 4 Call Service Errors 3-1 page 3- 2 3- 3 3- 5 3- 6 3- 9 3-16 3-17 3-17 3-18 3-19
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 47
    Fuser Unit, toner on it may spill off on your cloth. Dust off your cloth. Use cold water to wash in out. Using hot water may leave a stain. (5) If a paper jam occurs using multiple copy and set copy, Jam Recovery screen will appear in the UI. Jam Recovery reprints the removed sheet(s). Refer to KIP
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 48
    1 Roll Deck Section (J-01, J-02, J-03, J-04) When a Paper Mis-feed occurs in the Roll Deck, the UI shows J-01 / J- J-01 J-02 J-03 J-04 Front Roll 1 Roll 2 Roll 3 Roll 4 Rear Clear the Paper Mis-feed using the following procedure: 1. Open the Roll Deck in issue. And then rewind the roll onto the
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 49
    the roll media correctly. Front Deck (Roll 1 / 3) Rear Deck (Roll 2 / 4) NOTE The outside rim of Flange should meet the black triangle marked on Slide Guide. Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding. OK NG Out of position Correct 4. Close the Roll
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 50
    05. J-05: Manual Feeder J-05 Roll 1 Roll 2 Roll 3 Roll 4 Front Rear Clear the Paper Mis-feed using the following procedure: 1. Pull out the mis-fed paper from the Manual Feeder, and if the leading edge of the paper is torn or folded, replace it with a new one. 3-5 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 51
    Paper Feed Section, the UI shows J-10 / J-11 / J-12. J-10: Front region J-11: Middle region J-12: Middle-Rear region J-10 J-11 J-12 Roll 1 Roll 2 Roll 3 Roll 4 Front Clear the Paper Mis-feed using the following procedure: 1. Open the Manual Table. Rear Manual Table 3-6 Chapter 3 Error
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 52
    2. Pull out the Upper Frame Unit to your side (front) with holding both handles. Handle Upper Frame Unit 3. Pull up both knobs, and then push the Top Cover to rear side. Top Cover Knob Knob Top Cover 3-7 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 53
    4. Remove the mis-fed paper. 5. Close Top Cover. Top Cover Print 6. Close Upper Frame Unit and Manual Table. Upper Frame Unit Manual Table 3-8 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 54
    Paper Mis-feed using the following procedure: 1. It is necessary for a printer with High Capacity Print Tray (option) to move it aside to "release position". First remove stacked prints from the tray. If your system does not have High Capacity Print Tray, go to step 4 on page 3-11. Prints Support
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 55
    down to release the tray. Tray (side section) Lock Lever Support Rod Lock Slide NOTE Please note that the tray may slightly bounce at the time of release. 3. Hold the thick wire parts of the tray to lift the entire tray. Insert the hook parts at the "release position" on the tray rest. Hold
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 56
    gently. Be careful not to tear the mis-fed paper. If it is possible to access it, close Exit Cover. High Capacity Print Tray requires relocation. See step 12 on page 3-14. If it is not possible, go to the next step. 6. Open the Manual Table. Print Manual Table 3-11 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 57
    7. Pull out the Upper Frame Unit to your side (front) with holding both handles. Handle Upper Frame Unit 8. Pull up both knobs, and then push the Top Cover to rear side. Top Cover Knob Knob Top Cover 3-12 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 58
    9. Remove the mis-fed paper. 10. Close Top Cover. Top Cover Print 11. Close Upper Frame Unit and Manual Table. Upper Frame Unit Manual Table For the printer with High Capacity Print Tray, go to step 12 on the next page for its relocation. 3-13 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 59
    insert the hook parts at the "lock position" on the top face of the printer's rear beam. Hold the thick wire Hold the thick wire Lock Position Lift up the entire tray Release Position rear beam NOTE (1) Do not hold a thinner wire to carry the entire tray. (2) Ejected prints will be stacked
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 60
    13. Lift the Support Rod to the printer. Fully slide the Lock Slide upward. Slightly push the tray down to catch its bottom hooking part on the top of the Support Rod. Push down Support Rod 14. Fully press the Lock Lever down to lock the tray. Lock Slide Lock Lever NOTE To fit the Lock
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 61
    a Paper Mis-feed occurs in the Outer Device, the UI shows J-21 / J-22. J-21, J-22: Outer Device (Auto Stacker, Folder, etc) J-21, J-22 Clear the mis-feed using the following procedure: 1. As for the way to clear the mis-feed, refer to the User's Manual for the Outer Device. 3-16 Chapter 3 Error
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 62
    the concerning deck/cover as it is impossible to print, if this error exists. 3. 2. 1 Roll Deck Open "Replace Roll" screen will appear on the UI screen when Upper / Lower Roll Deck is open. Completely push the concerning Roll Deck toward the printer
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 63
    shows "Door Open". Check if the Upper Frame Unit and the Top Cover are closed firmly. Top Cover Upper Frame Unit OK Correct: Both Top Cover / Upper Frame Unit closed firmly NG NG Push backward Push forward Wrong: Top Cover open Wrong: Upper Frame Unit open 3-18 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 64
    3. 2. 3 Exit Cover Open If Exit Cover is open, the UI screen shows "Door Open". Check if Exit Cover is closed firmly. Exit Cover 3-19 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 65
    , refer to [2.3 Replacing Roll Media] on page 2-5. 3. 3. 2 Toner Empty When the printer is running out of toner, the UI Screen will display "Toner Empty" sign. For the toner cartridge replacement procedure, refer to [2.4 Replacing Toner Cartridge] on page 2-13. 3-20 Chapter 3 Error Correction
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 66
    Over Temperature Error Main Motor Error Developer Error Counter Error Cutter Error Fuser Motor Error Wire Cleaning Error Fuser Thermostat Error Toner Density Detect Error Outer Device Error RFID Error High Voltage Power Error If any of the Error Codes listed above appears; 1. Turn off KIP 7700, and
  • Konica Minolta KIP 7700 | KIP 7700 User Guide - Page 67
    Digital Printer KIP 7700 User's Manual Version A.1 (Issued on July 16, 2009) Published by Katsuragawa Electric Co., Ltd. 21-1 Shimomaruko 4-Chome, Ohta- the modification of machine and so on. © 2009 Katsuragawa Electric Co., Ltd. No part of this publication may be copied, reproduced or distributed in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Version A1
KIP 7700 User Manual