Konica Minolta KIP 7700 KIP 7700 User Guide - Page 40

Placing Cut Sheet Media

Get Konica Minolta KIP 7700 PDF manuals and user guides View all Konica Minolta KIP 7700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

2. 5 Placing Cut Sheet Media 1. Open Manual Table. Manual Table 2. There are several size markings on Manual Table which indicate possible feed positions. Place a cut sheet in a required size on the table between its concerning size markings then insert it into Manual Feeder. When the leading edge touches the feeding roller, the machine automatically carries and sets the sheet at the proper position. Size Markings Manual Table NOTE (1) As a curly cut sheet will cause a mis-feed, straighten the sheet as far as possible before printing. And set the sheet in "curl down" direction as a mis-feed can be avoided. "Curl up" sheets tend to result in a mis-feed. OK NG Correct (curl down) Wrong (curl up) (2) Setting a cut sheet to the bypass feeder while printing may cause a paper jam. Be sure to check the printer is idle (not processing a print job) before setting a cut sheet. 2-17 Chapter 2 Basic Operations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Chapter 2
Basic Operations
2-17
2. 5
Placing Cut Sheet Media
1.
Open Manual Table.
2.
There are several size markings on Manual Table which indicate possible feed positions.
Place a cut sheet in a required size on the table between its concerning size markings then
insert it into Manual Feeder.
When the leading edge touches the feeding roller, the machine automatically carries and sets
the sheet at the proper position.
NOTE
(1) As a curly cut sheet will cause a mis-feed, straighten the sheet as far as possible before
printing. And set the sheet in “curl down” direction as a mis-feed can be avoided. “Curl up”
sheets tend to result in a mis-feed.
Correct (curl down)
Wrong (curl up)
(2) Setting a cut sheet to the bypass feeder while printing may cause a paper jam.
Be sure to check the printer is idle (not processing a print job) before setting a cut sheet.
Manual Table
OK
NG
Size Markings
Manual Table