Konica Minolta KIP 7770 KIP 7770 User Manual - Page 20
Environmental Condition - Correction, Turn on the Dehumidify Heater.
View all Konica Minolta KIP 7770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1. 7. 4 Environmental Condition - Correction Take a necessary treatment according to the environmental condition as shown below. Humidity(%) Low 40% 70% High Possible problem "Void of image", "crease of paper" and other problems occurs when you print with plain paper and vellum. "Void of image" occurs when you print with vellum. "Void of image" occurs when you print with plain paper and vellum. "Void of image", "crease of paper" and other problems occurs when you print with plain paper and vellum. Necessary treatment 1. Install the humidifier in the room, and humidify the room air. 2. Remove the media from the machine right after the completion of print, and keep it in a plastic bag. If you will not make print soon, remove the vellum from the machine and keep it in a plastic bag. Remove the paper from the machine after everyday use, and keep it in a plastic bag. If you will not make print soon, remove the media from the machine and keep it in a plastic bag. 1. Turn on the Dehumidify Heater. 2. Remove the media from the machine right after the completion of print, and keep it in a plastic bag. NOTE (1) KIP 7770 is equipped with the Dehumidify Heater. Using it in high humidity environment (65% or higher) is recommended. Refer to [2.7 Dehumidifying Roll Media]. (2) "Void of image" and "crease of paper" will occur in case of extremely high or low humidity. Normal Print Crease of paper If the media is humidified; Normal Print Loss of image If the media is humidified; (continued on the next page) 1-13 Chapter 1 Before Use