Konica Minolta ProJet 3500 HDMax Cube3 User Guide - Page 72
NOTE: The print jets will heat to operating temperature°
View all Konica Minolta ProJet 3500 HDMax manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
6. Apply two thin layers of Cube Glue to the print pad. Select the checkmark to continue. NOTE: For best results, allow the glue to dry before printing. NOTE: To ensure proper adhesion, the glue area should be larger than the base of your printed creation. NOTE: The print jets will heat to operating temperature. NOTE: The printer will begin to print. 7. When the printer has finished printing, select the checkmark to go to the main menu. NOTE: Follow the steps in the section titled Finishing Your Creation. 3D Systems, Inc. 68
68
3D Systems, Inc
.
6°
Apply two thin layers of Cube Glue to the print pad° Select the
checkmark
to
continue°
NOTE: For best results, allow the glue to dry before printing°
NOTE: To ensure proper adhesion, the glue area should be larger
than the base of your printed creation°
NOTE: The print jets will heat to operating temperature°
NOTE: The printer will begin to print°
7°
When the printer has finished printing, select the
checkmark
to go to the main
menu°
NOTE: Follow the steps in the section titled
Finishing Your Creation
°