Konica Minolta ProJet 3510 HDPlus Cube3 User Guide - Page 84
NOTE: Ensure the jet wiper is fully seated before reinstalling the, purge bin assembly°
![]() |
View all Konica Minolta ProJet 3510 HDPlus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2. Pull the jet wiper (A) upward. A 3. Install the new jet wiper onto the purge bin and reinstall the purge bin assembly into the printer. NOTE: Ensure the jet wiper is fully seated before reinstalling the purge bin assembly. 4. Select the checkmark to confirm the replacement of the jet wiper. 3D Systems, Inc. 80
![](/manual_guide/products/konica-minolta-cube-cube3-user-guide-43708ee/84.png)
80
3D Systems, Inc
.
2°
Pull the jet wiper (A) upward°
3°
Install the new jet wiper onto the purge bin and reinstall the purge bin assembly
into the printer°
NOTE: Ensure the jet wiper is fully seated before reinstalling the
purge bin assembly°
4°
Select the
checkmark
to confirm the replacement of the jet wiper.
A