Konica Minolta bizhub 181 IC-206 User Manual - Page 187
Specifying the time zone, Press the [Reset] key.
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
7 Network settings - If an NTP server was specified: The date and time that data is sent with the Scan to E-Mail or Scan to FTP operation are automatically added to the data at the same time that the transmission date and time are recorded in the transmission log. - If an NTP server was not specified: Only a transmission number is added to data sent with the Scan to E-Mail or Scan to FTP operation; the transmission date and time are not added to the data. In addition, the date and time are not recorded in the transmission log. - For the NTP server address, consult with the network administrator. The message "ACCEPTED" appears, and then the "USER SETTING" menu appears again. 7 Press the [Reset] key. The time is acquired from the NTP server, and then the time on the machine is set. Specifying the time zone 1 Press the [Utility] key in the control panel. 2 Press the [,] or [+] key until "ADMIN. MANAGEMENT" is selected, and then press the [OK] key. 7-48 IC-206