Konica Minolta bizhub 368e bizhub 368e/308e Security Operations User Manual - Page 86
Changing the Administrator Password, Touch [Administrator Password].
View all Konica Minolta bizhub 368e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
2.14 Changing the Administrator Password 2 2.14 Changing the Administrator Password When a log-on to the Administrator Mode becomes successful, the machine enables the operation of changing the Administrator Password required for accessing the Administrator Mode. The Administrator Password entered for the authentication purpose appears as "*" on the display. Changing the Administrator Password 0 For the procedure to call the Security Settings screen on the display, see steps 1 through 3 of page 2-15. 0 Do not leave the machine with the setting screen of Administrator Mode left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Mode. 1 Call the Security Settings screen on the display from the control panel. 2 Touch [Administrator Password]. 3 Enter the currently set Administrator Password from the keyboard. % Touch [C] to clear all characters. % Touch [Delete] to delete the last character entered. % Touch [Shift] to show the upper case/symbol screen. % Touch [Cancel] to go back to the Security Settings screen. 4 Touch [OK]. % If a wrong Administrator Password is entered, a message that tells that the Administrator Password does not match appears. Enter the correct Administrator Password. % If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized access. If a wrong Administrator Password is entered a predetermined number of times (once to three times) or more set by the administrator, the Utility screen appears and the machine is set into an access lock state. To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and then turn on, the main power switch of the machine. If the main power switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When bizhub 368e/308e 2-62