Konica Minolta bizhub 4050i bizhub 4750i/4050i Quick Guide - Page 23
Loading paper
View all Konica Minolta bizhub 4050i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
6 6.2 Loading paper No paper setting is required because frequently used paper is loaded during general use. This section describes how to use paper that is not usually loaded into a paper tray. The methods for loading envelopes and postcards are as follows. 6.2.1 Loading paper in Tray1 Up to 500 sheets of plain paper can be loaded into Tray 1. Applicable paper types Plain paper, single-side-only paper, special paper, thick paper, postcard (4 e 6 (A6 Card)), letterhead, colored paper, envelope, label sheets, recycled paper, and glossy paper (coated paper) How to load paper 1 Pull out the tray. NOTICE Be careful not to touch the surface of the Paper Feed Rollers with your hand. 2 Slide the Lateral Guide to fit the size of the loaded paper. 3 Load paper into the tray with the print side facing up. 4 When you load paper other than plain paper or change the paper size, specify the paper type and paper size. % For details on how to specify the paper type and paper size, refer to the HTML User's Guide. 6.2.2 Loading paper into the Bypass Tray When selecting a paper size other than for paper trays, use the Bypass Tray. To use the Bypass Tray, specify the paper type and paper size. Applicable paper types Plain paper, single-side-only paper, special paper, thick paper, postcard (4 e 6 (A6 Card)), letterhead, colored paper, envelope, label sheets, recycled paper, and glossy paper (coated paper) How to load paper 1 Open the Bypass Tray. NOTICE Be careful not to touch the surface of the Paper Feed Rollers with your hand. 22 bizhub 4750i/4050i