Konica Minolta bizhub 4750 bizhub 4750/4050 Fax Functions User Guide - Page 9
Operations required to use this function
View all Konica Minolta bizhub 4750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2.2 Operations required to use this function 2 2.2 Operations required to use this function Checking the modular cable connection Check that a modular cable is connected between the LINE port and the relevant telephone line. Use the TEL port to connect a telephone cord. 1 2 No. Name 1 TEL (telephone) Jack 2 LINE (telephone line) Jack Telephone Cable - Connect a telephone cable with a ferrite core to the LINE (telephone line) Jack of this machine. (Connect the modular jack on the ferrite-core-equipped end of the telephone cable to the telecommunication port.) In addition, connect a telephone cable with a ferrite core to the TEL (telephone) Jack. (Connect the modular jack on the ferrite-core-equipped end of the telephone cable to the port for connecting a telephone.) - If there is no ferrite core attached to the cable, radio wave reception failures for radios and televisions may occur. - Follow the instructions shown below to attach a ferrite core. - Loop the cable through the ferrite core once. - Ensure that the cable is not pinched by the ferrite core. - Attach the ferrite core 20 mm (+/-5 mm) away from the connector. Specifying the type of telephone line Specify the type (dialing method) of telephone line to which this machine is to be connected. The dialing method must be correctly specified to ensure communication can take place. To configure settings: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Dialing Method] [Fax Functions] 2-3