Konica Minolta bizhub 552 bizhub 652/552 Network Scan/Fax/Network Fax Operatio - Page 50
Network settings, Specifying an E-mail address for this machine, Connection of modular cable
View all Konica Minolta bizhub 552 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4.1 To begin operation 4 Network settings An IP address must be assigned to the machine and settings, such as the SMTP server, must be specified in order to use the machine on the network. For the detailed procedure, refer to the [User's Guide Network Administrator]. Specifying an E-mail address for this machine An E-mail address must be registered to this machine to send scanned data via E-mail or to use the Internet Fax function. This E-mail address is used for sending/receiving data. It is recommended that the E-mail address registered for the administrator be used. If the E-mail address registered for the administrator is not specified, the sender's E-mail address must be entered for each Scan to E-mail operation. Note that Scan to E-mail operations are not possible if a From address is not entered. Reference - If User Authentication is enabled, the E-mail address specified for each user will be From address. d Reference For details on setting the E-mail address for this machine, refer to the [User's Guide Network Administrator]. 4.1.3 Connection of modular cable To send/receive G3 fax that use the telephone line, connect the modular cable to this machine. To use the G3 fax function, the optional Fax Kit FK-502 must be installed onto the machine. To use two telephone lines, one more optional Fax Kit FK-502 must be installed onto the machine. In this case, two modular cables must be connected. Connect one end of the modular cable to the telephone adapter, and the other end to the predetermined connector of this machine. (The following illustration shows that two units of the Fax Kit FK-502 are installed.) bizhub 652/552 4-3