Konica Minolta bizhub C280 bizhub C220/C280/C360 Network Administrator User Gu - Page 169
Certificate validation, IEEE802.1x Authentication Setting]
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
8.10 Using IEEE802.1X authentication 8 Item [EAP-TTLS] [anonymous] [Inner Authentication Protocol] [Server ID] [Client Certificate] [Encryption Strength] [Network Stop Time] [Stop Time] Description Configure settings for EAP-TTLS. Enter an anonymous name to be used for EAP-TTLS authentication (up to 128 characters). This item is available if [EAP-Type] is set to [EAP-TTLS] or [Depend on Server]. Select an EAP-TTLS inner authentication protocol. This item is available if [EAP-Type] is set to [EAP-TTLS] or [Depend on Server]. Enter a server ID (up to 64 characters). This setting is required if you verify the CN of the server certificate. Select whether to encrypt authentication information using client certificates of this machine. You can configure this setting when client certificates are registered in this machine. If [EAP-Type] is [EAP-TLS], the client certificates are always required. This setting can be configured even if [EAP-Type] is set to [EAP-TTLS] or [PEAP]. Select an encryption strength level for encrypted communication with TLS. • [Low]: Keys of any length are used for communication. • [Mid]: Keys that are more than 56 bits in length are used for communication. • [High]: Keys that are more than 128 bits in length are used for communication. This item is available if [EAP-Type] is set to anything other than [OFF] or [EAP-MD5]. If an authentication process does not succeed within the specified time, all network communication will stop. To specify the delay between the start of an authentication process and the stop of network communication, select this box. Specify the delay (sec.) between the start of an authentication process and the stop of network communication. To restart the authentication process after network communication has stopped, turn the main power of this machine off and on again. Prior check Whether to verify the CN of the server certificate 8.10.4 Certificate validation [IEEE802.1x Authentication Setting] In the administrator mode of PageScope Web Connection, select [Network] ö [IEEE802.1x Authentication Setting] ö [IEEE802.1x Authentication Setting]. Item [Certificate Verification Level Settings] [Validity Period] [CN] [Chain] Description To verify the server certificate, configure settings to verify the certificate. Prior check Select whether to check that the server certificate is within the validity period. Select whether to check that the CN of the server certificate matches the server address. To check the CN, specify [Server ID]. Select whether to check that the server certificate chain (certification path) is correct. The chain is validated by referencing the external certificates managed on this machine. For details, refer to page 8-34. bizhub C360/C280/C220 8-31