Konica Minolta bizhub C280 LK-101/LK-102/LK-103/LK-105 License Authentication - Page 46
f Input Deactivation Code and press [END].
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
e) Select [Deactivation Code]. for Customer Engineer f) Input Deactivation Code and press [END]. * Please pay attention "U" and "V", "0 (number)" and "O (alphabet)". "0 (Number)" is not used in [Deactivation Code]. g) Press [Apply] after checking Function Code and Deactivation Code you entered. h) Print out displayed [Deactivation Complete Code] or write it down, and reboot MFP. If you set A4 (SEF) to paper tray, you can press Start button and print the code out. i) You can check [Deactivation Complete Code] from the following procedure. Service Mode> Billing Setting> License Management> List Deactivation procedure in MFP completed. *If there are no activated functions, you cannot open [Function List]. Issued by BT-CSO 46 Ver 1.01
for Customer Engineer
Issued by BT-CSO
Ver 1.01
46
e) Select [Deactivation Code].
f) Input Deactivation Code and press [END].
* Please pay attention “U” and “V”, “0
(number)” and “O (alphabet)”.
“0 (Number)” is not used in [Deactivation
Code].
g) Press [Apply] after checking Function Code
and Deactivation Code you entered.
h) Print out displayed [Deactivation Complete
Code] or write it down, and reboot MFP.
If you set A4 (SEF) to paper tray, you can
press Start button and print the code out.
i) You can check [Deactivation Complete
Code] from the following procedure.
Service Mode> Billing Setting> License
Management> List
Deactivation procedure in MFP completed.
*If there are no activated functions, you cannot
open [Function List].