Konica Minolta bizhub C3110 bizhub C3110 Description of Utility Keys - Page 18

5.4 [Printer Settings] 5 5.4 [Printer Settings] [PAPER MENU] To display: [UTILITY] - [User Settings] - [Printer Settings] - [PAPER MENU] Configure the paper and paper tray settings used for printing, and the setting on printing condition if no setting is specified by the printer driver. Settings [DEFAULT TRAY] [OPTIONAL TRAY SETTING] [Manual] [Tray 1] [Tray 2] [DUPLEX] [COPIES] [COLLATE] [BINDING] [TRAY CHANGING] [TRAY MAPPING] [TRAY MAPPING MD.] [LOGICAL TRAY0] to [LOGICAL TRAY9] [ORIENTATION] [Minimal Print] [TIFF Paper Setting] Description Select a paper tray you want to use preferentially. [Tray1] is specified by default. Specify whether to apply the optional paper size and paper type specified in each tray. Specify whether to apply the optional paper size and paper type specified in [UTILITY] - [Paper Setting] - [Manual]. [Optional Size for Manual]: [OFF] is specified by default. [Optional Type for Manual]: [OFF] is specified by default. Specify whether to apply the optional paper size and paper type specified in [UTILITY] - [Paper Setting] - [Tray 1]. [Optional Size for Tray 1]: [OFF] is specified by default. [Optional Type for Tray 1]: [OFF] is specified by default. Specify whether to apply the optional paper type specified in [UTILITY] - [Paper Setting] - [Tray 2]. [OFF] is specified by default. This function is displayed when the optional [Lower Feeder Unit] is installed. Select whether or not to enable 2-sided printing. [OFF] is specified by default. Enter the number of copies to be printed. [1] is specified by default. When printing multiple sets of copies, select whether to make prints on a set basis. This function is available when an optional Hard Disk is installed. [OFF] is specified by default. Select the binding position for 2-sided printing. [Left Bind] is selected by default. When the paper tray has become empty during printing, select whether or not to allow automatic switching to a paper tray that contains paper of the same size, same orientation, and same type (ATS: Auto Tray Switch). [ON] is specified by default. Specify the paper tray to be used for printing when a print job is received by the printer driver of other companies. Select whether or not to enable the tray mapping. [OFF] is specified by default. Assigns logical trays 0 to 9 to physical trays. Select the orientation of the image to be printed. [PORTRAIT] is specified by default. Select whether or not to slightly reduce the full page size when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file. This function is available when printing the entire original image, including its edges. [OFF] is specified by default. Specify the method for determining the paper to be used when a TIFF, JPEG, or PDF file is directly printed. • [Auto Paper Select]: Prints on paper that matches the image size. • [Priority Page Size]: Prints on the primary paper size. [Priority Page Size] is specified by default. [Description of Utility Keys] 5-5