Konica Minolta bizhub C35 bizhub C35 Printer/Copier/Scanner User Guide - Page 213
Using a Web Service, Settings required to use a Web Service, Installing this machine on the computer
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Using a Web Service The scan command can be sent from a computer (Windows 7/Vista/Server 2008) on the network or this machine can scan using a specified operation, and the scan data can be sent to a computer. The settings that must be specified in advance on the computer are described below. Settings required to use a Web Service The following settings are required in order to use a Web Service. Install this machine on the computer. Specify settings on the machine for using a Web Service. " Specify the Web Service settings on the machine from the Admin Set- tings screen. For details, refer to the [Reference Guide]. Installing this machine on the computer Confirmation before installation Before installation, make sure that "Network Discovery" (Network and Sharing Center in Control Panel) is enabled. Installation procedure 1 In the Start button menu, click "Network". The devices connected to the network appear. 2 Right-click the scanner icon for this machine, and then click "Install". - Depending on the settings specified on the computer, a UAC (User Account Control) message may appear. Check the information described in the message, and then continue with the procedure. - If both scanning and printing using a Web Service have been enabled on this machine, this machine appears as a printer icon. - The driver software is automatically installed. After a confirmation message appears, click [Close]. 3 From the control panel of the machine, select [Scan to Folder] - [Direct Input] - [Web Service Settings], and then check that a destination appears. 9-12 Using a Web Service