Konica Minolta bizhub C451 bizhub C203/C253/C353/C451/C550/C650, bizhub 361/42 - Page 11
Enabling Overwrite Temporary Data - default password
View all Konica Minolta bizhub C451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3 Enabling Overwrite Temporary Data Overwrite Temporary Data should be enabled if the deletion of any latent image data that might be on the HDD after a print, scan or fax is required. This feature requires two different settings; Mode 1 (1x pass) or Mode 2 (3x pass) Setting Mode 1 Mode 2 Overwrite Method Overwrite with 0 x 00 Overwrite with 0 x 00 Overwrite with Oxff Overwrite with the letter "A" (Dx61) Verify Standards NAVSO P-5239-26 (US Navy) DoD 5220.22-M (Department of Defense) AFSSI5020 (US Air Force [Encryption Priority] refers to overwriting the data in HDD and the buffered data at the full strength of the Encryption Key. It is recommended that [Encryption Priority] be selected to achieve a greater effect of encryption. [Overwrite Priority] refers to overwriting the data in HDD and the buffered data at the strength of the selected overwrite mode (1 or 2) [Encryption Priority] is the default setting. NOTE: Encryption and Overwrite Priority will only be available when the Security Encryption Kit has been installed and enabled. 1 Enter the Administrator Mode on the MFP display, Utility/Counter button > Administrator Settings > Input Admin Password > Security Settings > HDD Settings. 2 Touch [Overwrite Temporary Data].