Konica Minolta bizhub C451 bizhub C451 Print Operations User Manual - Page 111
For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
View all Konica Minolta bizhub C451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Setting up network printing 3 11 Use the NetWare server console to load MONITOR.NLM. 12 Select the connection information and, in the active connection col- umn, check that the created PServer is connected. 2 Reminder When turning the power off, then on again, wait at least 10 seconds before turning the power on again; otherwise, this machine may not function properly. For NetWare 5.x/6 Novell Distributed Print Service (NDPS) 2 Note Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been created and loaded. Also, before performing the following procedure, check that the TCP/IP protocol has been set in the NetWare server, and check that the IP address has been set for this machine and that this machine is on. 1 Log on to NetWare as an administrator from a client computer. 2 Start up NWadmin. 3 Right-click the organization or organizational unit container where you will create the printer agent, and then click "NDPS Printer" on the "Create" sub-menu. 4 In the "NDPS Printer Name" box, enter the printer name. 5 In the "Printer Agent Source" column, select "Create a New Printer Agent", and then click the [Create] button. 6 Check the printer agent name, and then in the "NDPS Manager Name" box, browse through the NDPS manager names, and register one. 7 In "Gateway Types", select "Novell Printer Gateway", and then register it. 8 In the Configure Novell PDS for Printer Agent window, select "(None)" for the printer type and "Novell Port Handler" for the port handler type, and then register the settings. C451 3-36