Konica Minolta bizhub C452 bizhub C452/C552/C552DS/C652/C652DS Print Operation - Page 22
Setup procedure
View all Konica Minolta bizhub C452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2.3 Setup procedure 2 2.3 Setup procedure To use this printing system, you must complete the setup in advance. The setup refers to a series of procedures for connecting the machine to the computer and installing the printer driver to the computer. Perform the setup using the following procedures. 2.3.1 For network connection 1 Connect this machine to the computer. 2 Check that the computer to be used is connected to the network. 3 Specify the IP address of the machine, and then connect it to the network. 4 Change the network settings for the machine according to the connection method or protocol. % LPR: In "LPD Setting", enable LPD printing. % Port 9100: In "TCP/IP Settings", enable the RAW port number (initial setting: "9100"). % SMB: Configure settings of "Print Settings" in "SMB Setting". % IPP/IPPS: In "IPP Setting", enable IPP printing. To use IPPS printing, install the certificate in advance. % Web Service Print: In "Web Service Settings", enable the print function. % Bonjour: In "Bonjour Setting", enable Bonjour. % AppleTalk: In "AppleTalk Setting", enable AppleTalk. 5 Install the printer driver. % Specify the network port for the printer driver according to the connection method or protocol. 6 Install the screen fonts. % The CD-ROM contains the European TrueType fonts as "screen fonts". The Screen Font or Screen Fonts folder in the CD-ROM contains the screen fonts. % Install the screen fonts using the standard function for the OS of adding fonts. For details, refer to Help of the Operating System. % Macintosh fonts are compressed. Decompress them before installing. Reference - After installing the printer driver, perform test print to make sure that the connections are made properly. d Reference For details on the connectable interfaces, refer to page 2-7. For details on the network settings, refer to the "User's Guide [Network Administrator]". The procedure for installing the printer driver varies depending on the connection method, operating system of the computer, and printer driver. For details, refer to page 3-2. To update an existing printer driver, uninstall it first. For details, refer to page 8-2. Configure the interface timeout settings in the Utility menu on the control panel if necessary. For details, refer to page 13-53. bizhub C652/C652DS/C552/C552DS/C452 2-8