Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 229
Main messages and their remedies, Troubleshooting table, Message, Cause, Remedy - waste toner
View all Konica Minolta bizhub C552 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
9.2 Troubleshooting table 9 Main messages and their remedies If any message other than those listed below appears, perform the operation described in the message. Message Originals left on original glass. Paper of matching size is not available. Select the paper size. Place paper in Bypass Tray. The original size cannot be detected Select the paper size. The image will not fit in the selected paper size. Change the direction of the original Cannot be set with XXX. The output tray has reached its capacity. Remove paper from the tray indicated by . Enter the login user name and password and then touch [Login] or press the [Access] key. Enter Account Name and password, and then touch [Login] or press the [Access] key. Your account has reached its maximum allowance. The part indicated by is open. Ensure that it is properly closed. Check covers. Install the Imaging Unit and close all doors [Install a toner cartridge.] [Set the toner cartridge, and close all doors.] Install the waste toner box and close all doors. Incorrect Imaging Unit is installed. Install the correct Imaging Unit and close all doors. Cause The original has been left on the original glass. Paper of a suitable size is not loaded in a paper tray. Paper of a suitable size is not loaded in the bypass tray. (1) The original is not positioned correctly. (2) An original with a nonstandard size or with a size too small to be detected is loaded. The image does not fit in the paper. Functions that cannot be used together are selected. Copy cannot be performed because the paper loading capacity of the output tray of the displayed Finisher or Job Separator reached the maximum. User authentication settings have been configured. Copies cannot be made unless a user name and correct password are entered. Account track settings have been configured. Copies cannot be made unless an account name and correct password are entered. The limit on the number of pages that can be printed has been reached. Since a machine door or cover is open or an option is not installed correctly, the machine is unable to make copies. The exit cover of the finisher is open. The indicated Imaging Unit is not installed correctly. The indicated toner cartridge is not installed correctly. The indicated toner cartridge is not installed correctly. The waste toner box is not installed correctly. The correct Imaging Unit is not set. Remedy Remove the original from the original glass. Either select paper of a different size or load paper of a suitable size. Load paper of the appropriate size into the bypass tray. (1) Position the original correctly. (2) Select the correct paper size. Turn the original 90° and load it. Make copies using only one of the functions. Remove all paper from the indicated tray. Enter the correct user name and password. (p. 4-8) Enter the correct account name and password. (p. 4-8) Contact the administrator of the machine. Make sure that all doors and covers of this machine and options are closed securely. Securely close the exit cover of the finisher. Reinstall each consumable and replaceable part. Or contact your service representative. Reinstall each consumable and replaceable part. Or contact your service representative. Reinstall each consumable and replaceable part. Or contact your service representative. Reinstall each consumable and replaceable part. Or contact your service representative. Reinstall each consumable and replaceable part. Or contact your service representative. bizhub C652/C652DS/C552/C552DS/C452 9-8