Konica Minolta bizhub C652DS bizhub C452/C552/C552DS/C652/C652DS Print Operati - Page 79
of model names.
View all Konica Minolta bizhub C652DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6.1 Mac OS X 10.2/10.3/10.4/10.5 6 3 Select "AppleTalk" for the connection method, and then select the zone to which the machine is connected. Connected printers are detected. % If no printer is detected, turn your printer off then on again. In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again. If you turn the printer on immediately after turning it off, it may not function correctly. 4 From the "Name" list, select the desired model name. The printer driver corresponding to the selected printer name is automatically selected. % After the printer driver is selected, go to Step 6. % If an incorrect printer driver is selected, go to Step 5. 5 Select the desired printer driver manually. % From "Printer Model", select "KONICA MINOLTA", and then select the desired model from the list of model names. 6 Click [Add]. When the selected printer is registered in the "Printer List", the setting procedure is completed. Configuring the LPR settings TCP/IP setting for the machine Specify the IP address for the machine. LPD setting for the printer Before using LPR printing, enable LPD printing in "LPD Setting" for the machine. d Reference For details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]". For details on the LPD settings for the machine, refer to the "User's Guide [Network Administrator]". bizhub C652/C652DS/C552/C552DS/C452 6-12