Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 29
Gap Adjustment, Now the Scan Measurement Adjustment is completed.
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2.2 The Workflow of Both Sides Adjust 2 11 Press [OK]. Now the Scan Measurement Adjustment is completed. % If fine tuning is needed, perform the Zoom/Image Shift Adjustment. See page 2-21 for details. 2.2.2 Gap Adjustment Adjust the magnification ratio and printing position of the back side with reference to the printing position of the front side. Output a chart to measure the measuring points on the back side to obtain the gap amount between front and back sides in order to determine an adjustment value, and then enter the value to make the adjustment. NOTICE Performing the Gap Adjustment may require readjustment of the Zoom/Image Shift Adjustment registered in a paper profile. NOTICE Gap adjustment is a simple method to adjust only the magnification ratio and image position of the back side. To adjust both front and back sides, perform the Chart Adjustment or Zoom/Image Shift Adjustment. bizhub PRESS 1250/1250P/1052, bizhub PRO 951 2-11