Konica Minolta bizhub PRESS C1070/1070P IC-308 Upgrade to version 2.0 Instruct - Page 2

Installing the system software

Get Konica Minolta bizhub PRESS C1070/1070P PDF manuals and user guides View all Konica Minolta bizhub PRESS C1070/1070P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

2 TO BACK UP THE CURRENT SYSTEM SETTINGS AND VERIFY THE SYSTEM VERSION 1 Ask the network administrator to archive any jobs that the customer wants to keep. The network administrator should save the jobs to removable media or a location on the network, so that the jobs can be imported back into the Fiery Color Server queue after software installation. 2 If you have not done so already, allow the network administrator the opportunity to print the Job Log and save any custom simulation and output profiles. If possible, print the following: • Configuration page-lists any installed options and records the customer's current Setup configuration so that it can be restored after the software installation. • Font List-lists the fonts currently on the HDD. Along with the fonts provided in the system software, the customer may have installed additional fonts. 3 On the Configuration page, verify the system version. Look for the Version and Memory field in the Fiery Server section of the Configuration page. • If the Version shows 2.0, this system has been upgraded and you do not need to upgrade. Installing the system software Follow the instructions below to install the system software version 2.0. TO INSTALL SYSTEM SOFTWARE NOTE: In this procedure, you can use both the Fiery Color Server control panel and the optional keyboard and mouse to interact with the installer messages. Software installation takes approximately 1.5 hour (not including the time needed to configure the Fiery Color Server). 1 Make sure that all USB storage devices and dongles have been removed from the Fiery Color Server. 2 Insert System Software DVD 1 provided with this kit into the DVD drive. 3 Reboot the Fiery Color Server. Wait while the system boots from the DVD. 4 When the language selection screen displays, select a language. 5 When "What do you want to do?" screen displays, choose New Installation. 6 When "This installation will erase all data on the hard disk drive(s). Continue?" message displays, choose Continue.

  • 1
  • 2
  • 3
  • 4
2
T
O
BACK
UP
THE
CURRENT
SYSTEM
SETTINGS
AND
VERIFY
THE
SYSTEM
VERSION
1
Ask the network administrator to archive any jobs that the customer wants to keep.
The network administrator should save the jobs to removable media or a location on the
network, so that the jobs can be imported back into the Fiery Color Server queue after
software installation.
2
If you have not done so already, allow the network administrator the opportunity to print
the Job Log and save any custom simulation and output profiles. If possible, print the
following:
•
Configuration page—lists any installed options and records the customer’s current Setup
configuration so that it can be restored after the software installation.
•
Font List—lists the fonts currently on the HDD. Along with the fonts provided in the
system software, the customer may have installed additional fonts.
3
On the Configuration page, verify the system version.
Look for the Version and Memory field in the Fiery Server section of the Configuration page.
•
If the Version shows 2.0, this system has been upgraded and you do not need to upgrade.
Installing the system software
Follow the instructions below to install the system software version 2.0.
T
O
INSTALL
SYSTEM
SOFTWARE
N
OTE
:
In this procedure, you can use both the Fiery Color Server control panel and the
optional keyboard and mouse to interact with the installer messages.
Software installation takes approximately 1.5 hour (not including the time needed to
configure the Fiery Color Server).
1
Make sure that all USB storage devices and dongles have been removed from the Fiery Color
Server.
2
Insert System Software DVD 1 provided with this kit into the DVD drive.
3
Reboot the Fiery Color Server.
Wait while the system boots from the DVD.
4
When the language selection screen displays, select a language.
5
When “What do you want to do?” screen displays, choose New Installation.
6
When “This installation will erase all data on the hard disk drive(s). Continue?” message
displays, choose Continue.