Konica Minolta bizhub PRESS C7000/C7000P bizhub PRESS C6000/C7000 Safety Infor - Page 12
Disassemble and Modification, 2.1.2 Power Cord, Safety Information
View all Konica Minolta bizhub PRESS C7000/C7000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2.1 Safety Information 2 2.1.1 Disassemble and Modification Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness. Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. 2.1.2 Power Cord Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. 2.1.3 Power Source Use only the power source voltage specified on the machine. Failure to do that could result in a fire or electrical shock. Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power outlet for more than the marked current value could result in a fire or electrical shock. Do not use an extension cord in principle. Use of an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required. The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs. bizhub PRESS C7000/C6000 2-3