Konica Minolta bizhub PRESS C70hc bizhub PRESS C70hc Safety Information Guide - Page 37

2.5 Operation Precautions 2 2.5 Operation Precautions To ensure the optimum performance of this machine, observe the precautions described below. 2.5.1 Power source The power source requirements are as follows. Destination Voltage Frequency North America 208 V to 240 V AC 60 Hz Europe, Southeast Asia 220 V to 240 V AC 50-60 Hz Australia 240 V AC 50 Hz Use a power source with as little voltage or frequency fluctuations as possible. 2.5.2 Operating environment The environmental requirements for correct operation of the machine are as follows. - Operating temperature: 10°C (50°F) to 30°C (86°F) - Humidity: 10% to 80% 2.5.3 Storage of printed materials To store printed materials, follow the recommendation listed below. - Printed materials that are to be kept for a long time should be stored where they are not exposed to light or high temperature in order to prevent them from fading or sticking together. - Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on printed paper. 2.5.4 Ozone release During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone adversely. However, be sure the room where the machine is being used has adequate ventilation, especially if you are printing a high volume of materials, or if the machine is being used continuously over a long period. 2.5.5 Direct sunlight Do not install the machine and its options in a place exposed to direct sunlight, otherwise the machine performance may be degraded or any trouble may be caused. bizhub PRESS C70hc 2-31