Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 84
Measure Spectrophotometer-2
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
4 Select the desired chart type from "Measure Spectrophotometer-2", and press [Print Mode]. [Type2] is recommended. 5 Press [Quality Adj.]. 6 Press [Screen Pattern] and select the screen that is changed at "Change setting of Custom Screen" in the adjustment items (screen for Density balance adjustment) . Tips [Stochastic] is unavailable. 7 Select paper for chart output. Tips - Load 12 e 18 w, SRA3 w, 11 e 17 w, or A3 w paper in a tray, then select that tray. Load the paper of paper type and weight that you want to register on the density balance adjustment data into the target tray. - This machine selects the density balance adjustment data to apply a job in accordance with the following priority. Priority 1: Screen > Priority 2: Paper Type > Priority 3: Weight > Priority 4: Registered Order (If there is no density balance adjustment data for the screen that corresponds to a job, the job is output without correcting its density balance.) 3-52