Konica Minolta bizhub PRESS C71hc FD-9 Auto Scan Spectrophotometer User Guide
Konica Minolta bizhub PRESS C71hc Manual
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub PRESS C71hc manual content summary:
- Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 1
AUTO SCAN SPECTROPHOTOMETER FD-9 E INSTRUCTION MANUAL Before using this instrument, please read this manual. - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 2
the instrument. Denotes an instruction. Be sure to disconnect the AC adapter from the AC outlet. This symbol indicates A.C. This symbol indicates D.C. Notes on this Manual • Copying or reproduction of all or part of the contents of this manual without KONICA MINOLTA's permission is strictly - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 3
the following points carefully and adhere to them. After you have read this manual, keep it in a safe place where it can be referred to AC adapter plug from the AC outlet, and contact the nearest Konica Minolta-authorized service facility. The instrument should not be operated if it is damaged - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 4
Be sure to use this instrument properly. Use of this instrument in ways other than those specified in this manual may result in risk of injury, electric shock, instrument damage, or other problems. ❙❙Operating Environment • Use the FD-9 at an ambient temperature of between 10°C and 35°C and relative - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 5
to the procedure on p. 30. • If the FD-9 breaks down, do not try to disassemble and repair it by yourself. Contact a KONICA MINOLTA authorized service facility. ❙❙Disposal Method • Make sure that the FD-9 and its accessories and packing materials are either disposed of or recycled correctly in - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 6
Table of Contents Safety Symbols i Notes on this Manual i Safety Precautions 1 Introduction 2 Notes on Use 2 Operating Environment 2 Measurement 2 11 Setting up FD-9 12 Necessary space 12 Attaching/Removing Paper Guide 13 Attaching 13 Removing 13 Attaching/Removing Auto Sheet Feeder FD- - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 7
test charts manually 23 Feeding test charts when using optional Auto Sheet Feeder FD-A09 23 Settings screen 24 Opening/closing settings screen 24 Settings screen layout 24 Setting items 24 Selecting and changing settings 25 Setting display language 26 Troubleshooting 27 Error messages - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 8
, etc.) in a safe place. The FD-9 is a precision measuring instrument. In the event that the instrument needs to be shipped to a Konica Minolta authorized service facility, the packing materials can be used to protect the instrument from impact and vibration during shipment. If the original packing - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 9
50/60Hz Output (Typical): 24 V 6.25A (STD-24050) USB Cable (3m) IF-A18 Used to connect the instrument to a computer. Paper Guide Used to guide the test chart into the instrument when feeding test charts manually. Measurement Utility Software FD-S2w Used to control the instrument from a computer. 7 - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 10
Optional Accessories Auto Sheet Feeder FD-A09 Used to automatically feed test charts into the instrument. Capacity: 100 sheets 8 - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 11
System Diagram 9 - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 12
12 Auto Sheet Feeder connector cover 13 Color measurement sensor unit 14 Base mounting screws 15 White calibration plate For attaching the Paper Guide. Shows instrument settings, status, error messages, etc. For selecting items from the setting screen or making numerical settings. For confirming - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 13
Preparations 11 - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 14
Preparations ❙❙Setting up FD-9 The FD-9 should be set up on a flat, level surface with sufficient space for the color chart in front of and behind the FD-9. There should be enough space in front of the FD-9 for the color chart to be measured to be inserted into and ejected from the FD-9 without any - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 15
used when test charts will be fed manually into the FD-9. • If the Auto Sheet Feeder FD-A09 will be used, the Paper Guide should be removed. • When the Paper Guide is not attached to the FD-9, it should be stored carefully where it will not be lost or broken. Attaching 1 While gripping - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 16
placed in the Auto Sheet Feeder, and they will be automatically fed into the FD-9 one by one to be scanned. Attaching • If the Paper Guide is attached to the FD-9, remove it before proceeding. See p. 13. 1 Unplug all cords and cables (AC adapter power cord, USB cable, LAN cable) from - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 17
Removing 1 Switch off the power of the FD-9. 2 Unplug all cords and cables (AC adapter power cord, USB cable, LAN cable) from the FD-9. 3 Lift the FD-9 straight up off of the Auto Sheet Feeder. 4 Replace the Auto Sheet Feeder connector cover on the FD-9. Preparations 15 - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 18
Preparations ❙❙Connecting the AC adapter Warning • Always use the AC adapter supplied as a standard accessory or a specified replacement AC adapter, and use the AC adapter only with an AC outlet of the rated voltage and frequency. Failure to do so may damage the FD-9 or AC adapter, or may cause - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 19
Switching Power On/Off ❙❙Switching power on 1 Slide the power switch to on ( | ). The FD-9 will start up. The Konica Minolta logo will be displayed for a few seconds, followed by the initialization display. When initialization has been completed (after about 25 seconds), the "Please connect" display - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 20
connecting the instrument and computer, the USB driver for the instrument needs to be installed. If it you will be prompted to install the driver when the instrument is first connected to you are prompted to install the USB driver, specify the USB driver included with the software or on the - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 21
to open the Device Manager. 3 Click "Ports (COM & LPT)" to expand it, and check the COM port assigned to "Measuring Instruments". On Mac OS X: 1 Press and hold the Option key on your keyboard, and click the Apple menu. 2 Choose "System Information" or "System Profiler". 3 In the window that appears - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 22
in the settings screen. • It is not possible to set the network name directly using the FD-9 buttons. 1 Press to open the settings screen. 2 Press or repeatedly to select "IP address" and press . The first number of the IP address will be highlighted. • "IP address" will be disabled if "DHCP - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 23
13 Repeat steps 3 and 4 until all numbers have been set for the default gateway. 14 Press to select "SAVE DATA" and press . The message "Caution: It reboots after saving setting data" will be shown. 15 Press to save the settings and reboot the FD-9. Once these values have been set, connection - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 24
automatically allot the IP address, subnet mask, and default gateway. Changing the DHCP setting 1 Press to open the settings screen. 2 Press or repeatedly to select "DHCP" and press . 3 Press or to change the setting to the desired setting. ON: Network settings are performed automatically - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 25
FD-S2w. For details on taking measurements, please refer to the instruction manual for the software that you are using. ❙❙Feeding Test Charts into FD Feeder, place the test charts in the supply tray and slide the paper guides so that they are positioned touching the sides of the test charts as shown - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 26
FD-9. It can be set or changed from within the software. For details, refer to the software instruction manual. English Japanese Chinese (Simplified) • Change is applied immediately after is pressed. ON: The network settings are automatically assigned using DHCP off: Use of DHCP is disabled IP - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 27
Settings screen ❙❙Selecting and changing settings Press or to move the cursor to the desired item. The value or current setting of the selected item will appear in the value/setting area. - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 28
language The language shown on the display panel can be selected according to the following procedure. 1 Press to open the settings screen. 2 Press or repeatedly to select "Display language" and press . A list of the language selections will appear, with the current setting highlighted - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 29
KONICA MINOLTA authorized service facility. Error message Paper jammed Cover opened Fatal Error Error code: ******** Warning code: ******** Possible cause/problem . 1 Press to eject the paper. If the paper cannot be ejected by the FD-9, continue with the steps below to manually clear the - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 30
Troubleshooting 9 Grasp the ends of the FD-9 and tilt the FD-9 body onto the base again. 10 Open the cover 11 Tighten the two screws as - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 31
the exit tray side, remove it. 10 Replace the FD-9 in the Auto Sheet Feeder, connect all cables again, and switch the FD-9 back on. Troubleshooting 29 - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 32
to the plate. • If a stain cannot be removed, contact the nearest Konica Minolta service facility. 8 Grasp the ends of the FD-9 and tilt the FD-9 FD-9, it may cause paper jams or problems with patch recognition. If paper jams or patch recognition problems start to occur more frequently, the inside - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 33
1 Make sure that the FD-9 is switched off. 2 Disconnect all cables (USB cable, LAN cable, AC adapter cable). 3 Open the cover. 4 Loosen the two screws as shown completely so that they are free of the base. 5 Close the cover. 6 Grasp the ends of the FD-9 and tilt the FD-9 body backward as shown. The - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 34
Scan Measurement Chart Conditions The FD-9 can scan charts conforming to the following conditions: Paper width 45 to 330 mm Paper length 170 to 660 mm Paper thickness 0.05 to 0.45 mm Minimum patch size: 6 x 6 mm Maximum number of patches per page A4-size paper: 1394 A3-size paper: 2928 • - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 35
Short-term repeatability Colorimetric: Within σΔE00 0.05 (Under Konica Minolta test conditions where a white calibration plate is measured 30 AC adapter, USB cable, Measurement Utility Software FD-S2w, Paper Guide Optional accessories Auto Sheet Feeder FD-A09 *1 Illumination for wavelengths below - Konica Minolta bizhub PRESS C71hc | FD-9 Auto Scan Spectrophotometer User Guide - Page 36
9222-A8AN-11 ©2015 KONICA MINOLTA, INC. BFMBGA Printed in Japan
AUTO SCAN
SPECTROPHOTOMETER
FD-9
E
INSTRUCTION MANUAL
Before using this instrument, please read this manual.